Hey guys I have a '95 Sunfire coupe and my turn signals wont work for some reason. I check the fuse and it was fine. I checked all the bulbs and none are burn't out. so I dont know what is wrong with it. I was thinking a flasher but I don't know where it is? I don't see one in the fuse box so I'm kinda lost. anyone have any ideas?
------------------------------------------------------
<img src=http://www.j-body.org/registry/leafsman38/RaiderCav.jpg></img>
Stop breaking stuff!!!!
The j-bodys are famous for their constant problems with the multifunction switch (controls turn signals, headlamps, hig beams, and what ever else you have on it). It could be that. Usally when a flasher fails, it fails in the closed circuit position, meaning it doesn't flash, but stays steady. Best bet is to just replace the switch.
Check the blinker fluid I bet your out.
Semper Fi SAINT. May you rest in peace.
STLWACO wrote:Stop breaking stuff!!!!
The j-bodys are famous for their constant problems with the multifunction switch (controls turn signals, headlamps, hig beams, and what ever else you have on it). It could be that. Usally when a flasher fails, it fails in the closed circuit position, meaning it doesn't flash, but stays steady. Best bet is to just replace the switch.
you mean the fuse block? I've checked that out and the fuse for the turn signals is fine.
what switch are you talking about replacing?
------------------------------------------------------
<img src=http://www.j-body.org/registry/leafsman38/RaiderCav.jpg></img>
Jackalope wrote:Check the blinker fluid I bet your out.
I'll get right on that
------------------------------------------------------
<img src=http://www.j-body.org/registry/leafsman38/RaiderCav.jpg></img>
never mind I know what you're talking about now. you think it could be the switch that is causing the problems?
------------------------------------------------------
<img src=http://www.j-body.org/registry/leafsman38/RaiderCav.jpg></img>
Raider wrote:STLWACO wrote:Stop breaking stuff!!!!
The j-bodys are famous for their constant problems with the multifunction switch (controls turn signals, headlamps, hig beams, and what ever else you have on it). It could be that. Usally when a flasher fails, it fails in the closed circuit position, meaning it doesn't flash, but stays steady. Best bet is to just replace the switch.
you mean the fuse block? I've checked that out and the fuse for the turn signals is fine.
what switch are you talking about replacing?
Not the fuses. The Switch. The lever you flip to turn on the signals.
Couldn't help it.
Semper Fi SAINT. May you rest in peace.
