I have some wires that were cutted-off on my 96 Cavalier, and now i'm struggling to put them back where they belong.. ..they were cutted off at two places, the first one under the driver side fender (near the winshield washer bottle), and the second place, it's at the relay just behind the radiator.. ..now I have no lights working..

At the relay, I have 2 orange wire and a blue one that was cutted off, and under the fender, I something like 1 blue, 2 pink, 2 red and 3 orange.. ..the rest I don't remember.. ..I figured out that the high-beams were working with the red/pink wires, but when I put them on, the light on the dash dosen't turn on..

Does anyone can at leat tell me what color wires are on the low-beam socket and the high-beam sockets, that would help me a LOT !!

Oh yeah in case someone was wondering, I don't have any sockets or bulbs on the car, I just have a mess of slashed wires so that's why I don't know what goes on where..

is it a 2.2 or a Z24? it would only matter if you were looking for the foglights too but anyway the wires that go into the left composite headlight assembly are: high beams = dark blue and pink. low beams = dark blue or orange to dark blue. on the right composite headlight assembly the wires are: low beams = orange to dark blue. high beams = orange to pink. for the left front marker light the wires are light blue to brown. for the right front marker light the wires are dark blue to brown. for the left front park/turn light the wires are light blue, brown, and black. the right front park/turn light are brown, dark blue, and black. i have the whole wiring assembly diagram if you need anything else.. i hope that this helps man... good luck..