My bother was a member of this group a long time ago. He had a '98 Z24 Cavy that he did a lot of work on. It was his baby. He passed away in 2002 and I was left the car. I took care of it and kept it in perfect condition until I had a bad collision with a semi.
Story in short: Everything in the engine compartment (minus computer and radiator) is in perfect condition. I am looking for a '95-'00 Z24 body to revive my special car. I do not need the car to run, just the body to be in good condition. If you know of any, please, let me know.
Thank you.
Location?
2000 Ford F-250 7.3 Powerstroke 4x4 - Not stock
1973 16' Tahiti Speedboat
1983 200 HP Mercury BlackMax
1997 Chevy Cavalier with 275K miles
Southern Indiana. So anywhere in KY or IN region. Thanks
Sorry to hear about your brother. Have you checked
craigslist?
Is it an auto or a manual? also... what color body are you looking for? I don't know if color really matters or not.
Thank you.
It's an auto, but we were hoping to find a manual. Any color will do. I eventually plan on getting it painted back to what the car was originally. It was a cranberry color with silver racing stripes. I have a few doors and some odds and ends that could replace any areas in the back that might be dented. Both doors are good still, it's the front (everything in front of the front tires) and unibody that is too far gone to fix.
I check craigslist often, but not really much of anything yet.
What was his name, if you do not mind me asking. His profile is still probably here.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
His name was Robert Wolfe. I don't know if it would still be on here. He die Dec 2002. The profile has been inactive ever since.
Here is a link to possibly his old profile.
Click Me.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
-MD- Enforcer wrote:Here is a link to possibly his old profile.
Click Me.
He passed away in 2002 and that profile was created in 2005.
I went as far back as JBO would let me this is all I found.
Click Me.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I believe with some work the front uni body engine cradle from any 95+ J-body will work. You might get lucky and find a whole car but probably gonna have to piece it back together. I would start with the cradle to make sure its even saveable. Also check junk yards for parts. I use car-part.com it lets you check for specific parts and will give u contact info and distance from you
