how do you adjust the cables and tracks, my right side was frozen and it skipped track. i took the glass out and screwed with the button and it sent the track all the way back on that side, so i popped of the cable stay to get it shut for now. any info or past dealings with this people?

I have had a few issues before. First thing to try would be to take the motor out and try and get everything squared back up and then reinstall the motor and try it and see what happens. It only take a few minutes and well worth the effort before buying parts. Also there are the two adjusting screws for the stops front and back that should not need adjusting. I only had to adjust mine a bit because the sunroof slid weird with the motor out and bound something up. It made it hard to open because one slide was moving before the other (actually one slide was further one direction and caused it to bind). I was able to get everything back together correctly though and it worked like a champ til the motor quit on me.

Just pull a new track assembly out of a yard. Ten times easier and it only take 6 bolt i believe to drop the tracks down.

RMPE wrote:I have had a few issues before. First thing to try would be to take the motor out and try and get everything squared back up and then reinstall the motor and try it and see what happens. It only take a few minutes and well worth the effort before buying parts. Also there are the two adjusting screws for the stops front and back that should not need adjusting. I only had to adjust mine a bit because the sunroof slid weird with the motor out and bound something up. It made it hard to open because one slide was moving before the other (actually one slide was further one direction and caused it to bind). I was able to get everything back together correctly though and it worked like a champ til the motor quit on me.

thats what i was hoping. its just been so cold here and theres some douche parked in front of my garage driveway, so i havent looked at the motor/drive assembly yet.

i had the same thing happen to mine... I took everything out and tried to get each side adjusted even... i got it so it would close all the way, and would start to slide back evenly.. but it only goes 1/4th of the way.. i can´´t figure out how to get the cables exactly where they should be,,, my roof originaly hit the button once for vent.. and again to open all the way.. but now i hit it and it only goes part way.. atleast it close´s tight now for the winter. all the info on this would be great!