Hey guys, I finally got my lambo kit installed (very happy with it, thanks again Joe), but had a little trouble that I would like to figure out.

In order to get my fenders off, I had to take the sideskirts off (duh). Drivers side was a piece of cake- a few bolts, and 3m adhesive down the side. The passenger's side, however..... Here's what I need to pick your brains about. The passenger sideskirt was laid on with two strips of adhesive tape. The top strip was the standard grey 3m stuff, th esecond strip (just below the 3m stuff) was this black rubber that held like friggin liquid nails. It took me and a friend (both of us pretty good sized guys) both pulling together to pull the stuff off. It gripped so hard that it actually flexed the rear quarter-panel out (it popped back in with no problem once we got the sideskirt off).

I'm wondering if any of you guys (or gals) know what this stuff is or where I can get some- I'd sure like to use it since the 3m isn't holding real well.




I may not be the sharpest crayon in the box, but at least I'm a pretty color