Hey guys,

I just finished my install of my MS2 full standalone supporting all aspects of the engine in my 99 z24. I did A lot of research and set up before starting it which payed off because it started on the first crank. I now have a question for those of you about your spark advance table at idle. I have been looking through a lot of maps from those of you who have them posted and was wondering what your idle rpm is and what Kpa value.

I have it set rough based of of basic tuning fundamentals so it idles a little rough but would like to achieve the smooth condition by comparing to a hptuners setup. I do feel that my spark advance may be a little late by the sound in the exhaust and the occasional pop.

I have a manual vacuum and boost gauge and it looks about the value when it ran off of the stock computer last fall, but want to make sure

I have tuned my IAC to about a 1000 rpm idle and reads about 30-35Kpa

thanks!