ran my z24 last night. pretty happy how it ran! - Racing Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ran my z24 last night. pretty happy how it ran!
Wednesday, October 30, 2013 9:54 AM
I went to Atco Raceway last night to make a few passes. It was the first time running my z24 but not the first time for me racing. Mods are as follows- my custom CAI (an actual CAI & not a WAI lol) Tuned by me with HP Tuners, poly engine and trans mounts. Spare and jack removed and 1/4 tank of gas. Regular old 16" street tires.

1st pass 15.65 @ 87mph 2.49 60' (one wheel peel action)
2nd pass 15.25@89.17mph 2.23 60' (bogged a lil)
3rd pass 15.25@88mph 2.18 60' (bogged a lil more)

I have slips and video that I can post up later tonight. My header,cutout and short throw came in yesterday so I should have them installed today after work :]


2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph


Re: ran my z24 last night. pretty happy how it ran!
Wednesday, October 30, 2013 10:06 AM
Lower those 60ft times and you may hit 14s. I used to trap 90-93 and I was in the 14s with 1.9-2.0 60ft times . But good job
Re: ran my z24 last night. pretty happy how it ran!
Thursday, October 31, 2013 3:07 PM
I hear you there. I was doing the math on my 60' times lol. I installed my header last night and will be installing my cutout on saturday perhaps. Then I'll log some pulls and retune as needed. I'm pretty sure the header/cutout will get me into the high 14's. I might order some 225 50 15 Hoosier drag radials before the end of the season as well
Attachments
15.25 slip.jpg (96k)


2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph

Re: ran my z24 last night. pretty happy how it ran!
Saturday, November 02, 2013 4:39 AM
Very nice times.

What were you launching at?

60 foot times are impressive on street tires.



FU Tuning



Re: ran my z24 last night. pretty happy how it ran!
Sunday, November 03, 2013 7:32 AM
Addicted to meth wrote:Very nice times.

What were you launching at?

60 foot times are impressive on street tires.


Thank you

expecting it to be a one-wheel wonder again, I launched it at 3000 rpm, giving the clutch a quick slip. but it hooked good and bogged lol

I don't have my 15.25@89mph pass on video, but I have the 15.25@ 88.75mph 2.18 60' pass on video (below). launching around 3000-3500rpm, It chirped the tires a lil bit and bogged. I'd like to get one of those inserts for the diff and see how it does after that. I recently installed a header and an electric cutout, so I want to go back on a night with similar weather and see what it gained me.

http://www.youtube.com/watch?v=jWZwKugdJdg&feature=youtu.be


2000 Cavalier Z24 5spd CRM
Eibach Anti Roll kit, Poly motor/trans mounts, custom made CAI, Header, cutout, tuned by me with HPtuners
14.81 @ 91.09 mph 2.06 60'
97 Saturn SC1 with DOHC swap. 13.7@98mph on motor. +75 shot 12.8 @107mph

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search