i want to get some pillar gauges but i dont know where i would have to hook up the oil pressure line to. could someone help please.
its not whats under the hood, its how you use it
2200 soon to be turbo
What engine, what year, etc...
--------------------------------------------------------
2002 Sunfire -->
- Ractive steering wheel
- ASA 17" EM9 + Nexen N5000 215/45/17 (steelies for winter)
- D-Spec Lowering kit @ 1.4" (issues currently
)
- Rockford P250.1 + MTX MZS1004 + Panasonic CQ-C8313U head unit
- Barely legal tint.
2000 Sunfire Se 2200 5 speed
its not whats under the hood, its how you use it
2200 soon to be turbo
it'll come with a sending unit. one day crawl under our car and look up at the oil filter. there's a plug that can be removed with a 3/8 ratchet (its a square drive, no socket). the sender goes there, then run your wires.
JBO Stickers! Get yours today!
thanks
its not whats under the hood, its how you use it
2200 soon to be turbo
what size are the threads that go back in there?
its not whats under the hood, its how you use it
2200 soon to be turbo
Rich Grayo Jr. wrote:it'll come with a sending unit. one day crawl under our car and look up at the oil filter. there's a plug that can be removed with a 3/8 ratchet (its a square drive, no socket). the sender goes there, then run your wires.
1/4" socket
Threads should be 3/8" NPT
well it got warm enough and i got to installing and to my surprise the adapter piece was the right size to fit the block. its all finished and no leaks, yea I didn't go with the electric style gauge...why you ask? i dont know either, but it looks good and performs well. Thanks for the help guys.
its not whats under the hood, its how you use it
2200 soon to be turbo
Sorry to thread jack, but..
What the deal with installing the sending unit on a 2005 Sunfire. I know the engine setup is a little different and it doesn't have a conventional oil filter. Where does the sending unit go? I was trying to figure it out the other day...
Thanks for any help.
