I have 96 Z 5spd, and I put a new clutch in my car about 2 weeks ago. I used a stock flywheel and torque'd them to 60 with red thread lock and my flywheel bolts still came loose!!! What should I torque them to now? Use washers?
Thanks!!
"sometimes the respect is more important..."
you are supposed to torque them to spec AND turn them another 1/4 turn if i remember correctly...
go buy a new set of bolts from gm, they come with the blue locktite already on them, they hold.
LEAVING FOR BASH TOMORROW!! WOOt!!!!!!!!
24# +90*.
Red lock tight is ok, but new bolts are suposed to be used.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
