4T40-E Trans/Turbo Chargers - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
4T40-E Trans/Turbo Chargers
Wednesday, February 14, 2007 4:33 PM
Please forgive me for my lack of knowledge on this subject but.
Can anyone tell me if its possible to have a turbo function with an aftermarket turbo system? The hp output with an N/A setup looks promising.But I can't resist the turbo.Any insight is appreciated thanks fellas!

Re: 4T40-E Trans/Turbo Chargers
Wednesday, February 14, 2007 10:37 PM
check out the boost forum and let people know what car/motor you have



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Re: 4T40-E Trans/Turbo Chargers
Wednesday, February 14, 2007 10:42 PM
I don't think there are any kits available where the charge pipe will bolt up for an auto correctly. You would have to fabricate charge pipes running from the turbo to the intercooler (or throttle body if no intercooler). And as long as the kit comes with a log style manifold, everything else will work just fine.


-

"Youth in Asia"...I don't see anything wrong with that.
Re: 4T40-E Trans/Turbo Chargers
Thursday, February 15, 2007 12:01 AM
Thanks for the help!
Re: 4T40-E Trans/Turbo Chargers
Thursday, February 15, 2007 9:32 AM
David Smith wrote:
Can anyone tell me if its possible to have a turbo function with an aftermarket turbo system?


Have a turbo function? I'm not sure what you are asking here.


- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.

Re: 4T40-E Trans/Turbo Chargers
Thursday, February 15, 2007 3:36 PM
Sorry a little spelling error,what I ment to ask is.Can anyone tell me if theirs a turbo kit that would function properly,with an automatic
trans? (4T40-E) I hope that clarifys what I ment.
Re: 4T40-E Trans/Turbo Chargers
Thursday, February 15, 2007 5:57 PM
one more time ask your question in the BOOST forum you will get better results and a custom setup will be your best bet.



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
Re: 4T40-E Trans/Turbo Chargers
Friday, February 16, 2007 6:27 PM
yup very well actually your trans will hold a boat load of power. they actually have yet to be really pushed.


"boobs now with Riboflabin"
Image
Re: 4T40-E Trans/Turbo Chargers
Saturday, February 17, 2007 4:59 AM
http://www.ipttrans.com/
I checked this site and I found a device call an electromatic transmission controller.Does anyone
know if this would help,or if its even
worth it to purchase?The retail on that thing is about 5-600....
Re: 4T40-E Trans/Turbo Chargers
Saturday, February 17, 2007 8:16 AM
that company is good, they quoted me for a tranny built in the past... can you link to the exact item though?

i dont have whatever it is, and i ran a 12.9 @ 110mph... i dont think you need it

the only thing i can think of that if could do electronically is increase shift pressures and for that you can get a b&m shiftplus for like 20 bucks used



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
Re: 4T40-E Trans/Turbo Chargers
Saturday, February 17, 2007 1:03 PM
http://www.ipttrans.com/inventory.cgi?action=description&item_id=937.116814388685 Here is that link for that kit. Theres actually two versions,they say this is the new one.

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search