Is there any company that still makes a decent-made log style turbo manifold for the eco? Was going to buy the cast one off ebay because I heard it was strong but I can no longer find it. And any steel ones I find have weak looking welds. I'd like to buy one badly. Help?
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
If you'd like a log manifold that's proven to 500 HP and low 11-second passes in a street J, let me know...we build them daily.
Bill Hahn Jr.
Hahn RaceCraft
World's Quickest and Fastest Street J-Bodies
Turbocharging GM FWD's since 1988
www.turbosystem.com
IamQwibby (Eco Meatcake) wrote:Be patient for a few weeks and you'll be rewarded
...What do you mean? What will change by then?
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
1KWKCAV [Jim wrote:]IamQwibby (Eco Meatcake) wrote:Be patient for a few weeks and you'll be rewarded
...What do you mean? What will change by then?
Hes swapping his out for a turbo header and Im assuming that means he will be putting it on ebay.
Or he could sell it to me directly and save himself some time.
Dude give me a price so I can plan for it. Maybe show me a pic of it so I can see how you have it setup and all. Thanx bud.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
Cody, too bad that's not a top mount. No way in hell the turbo would clear my auto trans.
Bill, just out of curiosity what does your ecotec log mani w/ a t3 flange run? This is a daily and will rarely see 10psi so the hp rating doesn't mean much in this case unfortunately.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
1KWKCAV [Jim wrote:]Cody, too bad that's not a top mount. No way in hell the turbo would clear my auto trans.
That isnt a problem. Just let Cody know what you want. RD Fabs FTW!!!
its an old concept. time for something new to take the reigns. - Z yaaaa
wtf happed to the thing i was gonna make??? am i to expensive or something? u know i can make u a log mani right? there is no easier mani to make then a log style.
mike
i make neons and j-bodys go fast
Sh*t sorry Mike I don't have your cell number anymore. Water plus phone equals new phone. How much to make a simple log mani, i'll buy all the flanges? The mani i have is just too f*cked up to deal with, I just need a new one. I'm hunting for a good deal and currently have two offers.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
a log is a log.... just find a good welder and your done.
Buy my stuff!!! CLICK
R.I.P. Brian Klocke, you will never be forgotten
^^^That's all I'm looking for. And I've seen Mike's welding in person on a number of metals and it's legit as hell. Still waitin on a response though Mike... Time is of the essence.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
well get me the flanges and 150.00 and build u a mani.
mike
i make neons and j-bodys go fast
1KWKCAV [Jim wrote:]Cody, too bad that's not a top mount. No way in hell the turbo would clear my auto trans.
Bill, just out of curiosity what does your ecotec log mani w/ a t3 flange run? This is a daily and will rarely see 10psi so the hp rating doesn't mean much in this case unfortunately.
Which turbo and wastegate would you be putting on it?
Bill Hahn Jr.
Hahn RaceCraft
World's Quickest and Fastest Street J-Bodies
Turbocharging GM FWD's since 1988
www.turbosystem.com
Bill, a Garrett t3t4 57trim and a Tial F38.
Mike, okay let me find the ecotec exhaust flange. Now that is a smokin deal.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
Oh yeah, Mike are we going with mild steel or stainless? Just makin sure I get the correct flanges.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
1KWKCAV [Jim wrote:]^^^That's all I'm looking for. And I've seen Mike's welding in person on a number of metals and it's legit as hell. Still waitin on a response though Mike... Time is of the essence.
Not arguing that, mike is very good welder and fabricator. My post was more so saying a log is a log and proven to x amount of hp isn't a factor.....
Buy my stuff!!! CLICK
R.I.P. Brian Klocke, you will never be forgotten
1KWKCAV [Jim wrote:]Bill, a Garrett t3t4 57trim and a Tial F38.
Mike, okay let me find the ecotec exhaust flange. Now that is a smokin deal.
Thanks! Seems like you've already got this handled, but we typically would charge $299 complete, all materials and flanges included. Our design is the most well-proven in the industry, with thousands sold in over ten years of production. They carry a five-year unlimited mileage warranty against cracking, and feature a fully machined turbo mounting flange pocket for optimal turbine inlet flow, unlike many inferior knock-offs.
We take great pride in the refinement this many years of continuous production has allowed, and feel the product we offer is hands-down the best you can buy.
Bill Hahn Jr.
Hahn RaceCraft
World's Quickest and Fastest Street J-Bodies
Turbocharging GM FWD's since 1988
www.turbosystem.com
Bill, 299 isn't bad at all! I still have to talk to Mike to see if he'll need my car for the mock up and what not. So if that's the case I may go with HRC. I can't afford to have my car down for just the mock up. I'm gettin the manifold asap then getting pipe for the downpipe and dump pipe, new drain and feed setup, etc. Mike, what's the word on down time?
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
Bill, link or picture of this log to see where the flanges are and angled? Blueprint works if thats all you have.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
pmed u jim
mike
i make neons and j-bodys go fast
pm replied
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
Mike will be doing the work since he gets parts for cheap. All mild steel too.
Thanks Mike, I'll call you when the money is ready. Other members may want to talk to him too if they need a log mani especially on a budget.
"Vroom."
"Yo I wouldn't race him, there's not even an interior in his car man."
"Vrooooooom PSSSSHHH!"
"Oh sh*t. F*ck that, dude..."
Just want to say what a great forum this is...
He went from need... to 3 different options... to solution in 2 days!!!
