So with a cam like..oh say..Duration @ .050, Valve Lift INTAKE 195, 456 EXHAUST 192, 440, coupled with 1.6:1 rocker arms, with the new valve lift am i at risk of impacting a piston?
That's JBP's Forced Induction cam profile I see. No, the JBP cam is designed to work with stock rockers or the Comp Cams roller tip rockers. However, I will say that some people have been having idle issues with the Forced Induction cam on the LN2. I would contact them regarding the lobe separation on the cam and make sure they have the specs down good enough. And if its still sketchy, you can always call Crane Cams and have them do a custom grind for you.
I was a retard, and now I'm permanently banned.
