Whrere would the Evap Canister Purge Valve Circuit and Valve be located? Are they in the same location?n This is for a 1995 Sunfire 2.2ohv 5sp.
evap canister is inside the fender well on the pass side of the car.
purge valve will have a red plug end on its wires with 2 hoses coming out of it.
Why do you need to know where it is?
If the reason is a code, it might be your gas cap not sealing.
01 cav w/01 3400 gam gt 4t45e
The purge valve is on top of the cannister correct?
I think thats where it is on yours. I think they also mounted it above the canister on the upper frame rail / radiator support, under the fender. If your not sure , look on the engine sticker , it should have an emissions routing diagram on it. Follow the lines and you will find it.
01 cav w/01 3400 gam gt 4t45e
i thought the evap purge was mounted on the ac compressor in my 96 z24
Yours might be by the A/C compressor. His is a 95 sun with a 2.2.
01 cav w/01 3400 gam gt 4t45e
Thanks for the info, I'll have on the weekend.
Found the solenoid, it behind the engine, just above the coil packs. PIA to change though!
