Well, hate to make this post, but I am tossing this out there to see what kind of offers I can get. Most of you know my build rather well, it is a fully built 2200, made to push 20-25# of boost through a completely custom setup. Right now the car has a starter problem, and doesnt want to crank. It is not completely tuned, so it is not a turn key project right now. But it is taking up space, and with my new job, I wont have time to touch it for years. So I am looking to sell it as a whole, or part it out. I have TONS of rare parts, both on it and sitting around my house/garage.
I would like to unload this as a whole unit, engine build was a $10k project, and has literally 10 miles on it + about 15 hours of idle time. This setup should put you well into the 400hp range. But as I said, I wont have the time to finish it for a couple years. It needs the starter issue resolved, and finished tuning. It was going through a stereo transformation, but will be sold with the stereo that was in it, and the custom sub enclosure for (4) 10's.
No satch, I wont take $5 and a ham sammich.
But seriously, I want to see what I can get as a whole, and if that doesnt work out, it will be parted.
I will throw some pics up. If I get the time, I will get the starter figured out and tune it, but if that happens, I will probably keep it.
Feel free to ask any questions about the car in the meantime.
NO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
john, you better keep this thing. you have probably the most impressive 2200 that i've heard of, you have to keep it.
HPT??? Id be interested in it if you dont sell it with the car or if/when you part out.
Good luck with the sale though.
Hey I never offered a ham sandwich!!!!!
JGM T-SHIRTS!!!!
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
For some reason I thought you had a Sunfire lol. Sucks to hear man good luck with the sale
Ah bummer... we were just talking about you at the shop today.
yeah, i really like working on it, but with the job i will be starting, I wont have the time to do anything. So I would rather see someone enjoy it as it is supposed to be enjoyed, instead of rotting in my garage.
And HPT goes with the car.
you can always just give it to me and ill keep it warm for you till you wanna work on it again
JGM T-SHIRTS!!!!
In Loving Memory of Phil Martin December 14 2005
Alexis: Dustin, you're ghey, lol. I am better. I have tits, and tits rule all.
Havent seen pics. I really like the hood, the evil eyes look bad ass!
like i said today let me know when/if you part it out. and if you dont part out or sell it, we should just get it down my shop once my cavys out and finish it, it doesnt need much except time which i have. I really want to see what it can do tuned..
or just give me your engine and you can have mine since its already out
lol, well if no one snags it up, ill get it down your place......that is when you have room for it. No matter what, I am finishing it as it is, so anything that isnt on it now, is for grabs.
That is going to be the seat brackets, RD Fabs harness bar, Sparco 4pt. harnesses, the 4-10" box, air ride, and a slew of other things.
but when I do finish it, I will dyno tune it to get some numbers from the setup, then continue with the sale.
But so everyone knows, I am also down for trading stuff, so throw me some offers for the whole car, or parts that are on it, or not.
Edited 1 time(s). Last edited Monday, November 16, 2009 9:45 AM
holy sex! nice freakin car and build.
can you just throw this son my 2200 for me?
, beautiful work man
John keep it and put it away. Your'll miss it when its gone.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
What all do you have sitting around?
Chuckles2002 wrote:What all do you have sitting around?
x2, preferable things that can fit on an 02 ecotec lol
.hmm those seat brackets and harness bar.....
OK, here is a "complete" list of parts that are available immediately. I say "complete" cause I am sure I am forgetting something.
- stock hood (black)
- RD Fabs Harness bar (powdercoated black)
- Wedge Engineering seat brackets
- 4 pt black w/ blue patch Sparco harnesses
- 2.5 bar T-map sensor WITH pigtail
- several sets of wheels, 17" (on car in pic), 19" ADR wheels, and a set of 18" chrome for a BMW (5x112 bolt pattern)
- z24 spoiler
- custom sub box that holds (4) 10" subs in the spare tire area. Is currently covered in carbon fiber that looks ok when there are subs in it.
- (2) 10" eclipse subs from the 4 i had bought to put in there, these are new in box, and were $300/piece.
- complete rear drum setup
- 2200 stock rad
- i have a couple gauge clusters in different configurations that i could sell
- ART air struts (these are spoken for)
- vert strut bar
- vert trunk hinges
- of course i have headlights laying ALL OVER THE PLACE
- i have some other stereo equipment, random things, wire, etc.
- 2200 head w/ new gasket
- if you are looking for something, hit me up...i probably have it. whether it is available immediately or not, thats a different thing.
Chris if you want those seat brackets, harness bar, and harnesses, let me know, and well work something out.
how much are you looking for
the 17"s on the car
make an offer, they are polished aluminum and tires are like new.
how much for the vert trunk hinges??
