Remaining Parts that need to go! - North East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Remaining Parts that need to go!
Saturday, April 04, 2009 8:28 PM
Ok everyone, here is a list of all the remaining J-parts I have in my possession that I need to get the hell out of my house. Buyers are to cover all shipping fees, pick up is always welcome. I will take M/O's. Certified checks, paypal (if using CC or Debit card add 4.9% to your total). I am not holding parts for anyone so first to show me the money wins, you can pay me and I can hold them till you pick them up however... More of a down payment on my next car, the better off I am. I am willing to play the Best offer game to, just don't try and low ball me.





RKsport Type-J Body Kit front and rear bumpers with mesh still not painted -$500

RKsport Importfighter 4 door Side Skirts, not painted -$200

...................................................................................................................................WILL SELL WHOLE KIT FOR $600 including side skirts.

RKsport Prostock Wing used (gloss black but needs a re-paint all LED's work) - $175

Discontinued 2000 Toyota Cavalier Fenders NEW in GM BOX - $350 - These can go UPS, I was quoted $78 for shipping to Ohio if i can get them into one box. (rough idea for anyone Box is 60x10x36)



Bare 2.2L Ecotec Vin F with 40,XXX miles -$350 (Pick up or will have to go freight. I am willing to ship it freight, but shipping is buyers responsibility)



RD Fabs Custom J-body Dual exhaust 2.5" used with magnaflow Cat, Resonator, and dual mufflers -$500( can be cut up for shipping, buyer would need to have it welded back together)



95-02 cavalier hood painted white in great shape - $50

95-99 Fenders in white in good shape -$40

95-99 Front bumper has a couple scuffs - $20

95-99 Rear bumper -$20

95-99 Front headlights in great shape- $50



95-99 Z24 front bumper foam crush guard - $25

03-05 Ecotec polish fuel rail -$50



2003 Cavalier sedan (automatic) Dash Harness - $50



2003 Cavalier Sedan body harness - $50

00-05 Cavalier Gauge cluster -$40

1999 Cavalier dash and body harness with Valet remote start and alarm installed - $50

2003 Cavalier Headlight Harness (no fogs) - $50

2004 Pontiac Sunfire Dash Harness - $50



2003 Cavalier Passenger airbag and SDM module pair never deployed - $250



95-99 Cavalier front and rear seats in great condition - $75 ( Pick up only)

95-05 Cavalier top dash pad no rips of tears - $50



00-05 Dash metal frame -$25

95-99 Dash Metal frame - $25

95-99 Charcoal dash NO CRACKS - $40 (pick up only)

00-05 Black HVAC heater box - $50

95-99 Black HVAV heater box - $50

HELM INC. 2003-05 Cavalier GM repair Manuals (book 1 and 2) - $75

TTR Front manaul trans mount bracket - $20

Misc interior 4-door pannel trim - Contact me...

1999 Cavalier Sedan Shell ( Doors in excellent condition, frame of car is 100% straight no accidents ever) would make a great project shell of stock car body, I don't care what you'd do with it.. -$450 OBO - Willing to work with someone on this. Would even include all remaining fenders, bumpers, etc in this cost.






Edited 1 time(s). Last edited Saturday, April 04, 2009 8:31 PM



Re: Remaining Parts that need to go!
Saturday, April 04, 2009 9:24 PM
you know you want to donate those toyo fenders for my sedan..

bump for a great guy... wish i had the $$ to pick them up.



Re: Remaining Parts that need to go!
Sunday, April 05, 2009 10:49 PM
So does that mean that my "dibs" on the toyos is non-acceptable?

Anyway i'll have a DP ready soon for them.


Edited 1 time(s). Last edited Sunday, April 05, 2009 11:07 PM


Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: Remaining Parts that need to go!
Sunday, April 05, 2009 11:02 PM
pm sent!!!!!!
Re: Remaining Parts that need to go!
Monday, April 06, 2009 9:29 AM
Kyle - Sorry bud, but I really need to get this crap out of my house ASAP as it is nothing but a hindered. I would like my basement rec room back for when I get out of college I have a place to escape from my mom.

All PM's replied to.



Re: Remaining Parts that need to go!
Monday, April 06, 2009 9:53 AM
I understand cody. I'll hit you up on AOL tonight to see if i cant tempt you with something.



Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: Remaining Parts that need to go!
Monday, April 06, 2009 10:15 AM
Tinkles wrote:I understand cody. I'll hit you up on AOL tonight to see if i cant tempt you with something.


Tempt him with the Liter of Love.

Hi Cody!



Re: Remaining Parts that need to go!
Monday, April 06, 2009 5:23 PM
Cody check your AIM instant messages... the Toyo Fenders arent discontinued from GM =P



Re: Remaining Parts that need to go!
Monday, April 06, 2009 6:26 PM
My dibs is out, so the fenders are up for grabs.



Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: Remaining Parts that need to go!
Monday, April 06, 2009 6:40 PM
nice parts there! good luck selling it all!
Re: Remaining Parts that need to go!
Thursday, April 09, 2009 8:03 PM
you should grap some friends and a few beers and set that airbag off in your back yard. lots of fun.

Re: Remaining Parts that need to go!
Saturday, April 11, 2009 1:36 PM
if the shell was boughten what exactly all included in this such as interior/exterior and suspension? Could be a possibility shortly. just need to know what is included. thanks



Re: Remaining Parts that need to go!
Saturday, April 11, 2009 6:44 PM
A lot of things will go with the shell....

* 95-99 sedan Interior for an automatic minus carpet. ( Dash less cluster, metal dash support, dash wiring harness, Body harness center console, auto shifter, seats, all other interior trim)
* 03 Sedan tan dash started to be painted black from glassing the crack together, cluster, metal support bar, Automatic dash harness, 03 body harness, 03 headlight harness

95-99 front bumper, fenders, headlights, hood, rear bumper

00-02 headlight brackets

Manual pedals installs but will include auto ones as well.

00+ Plastic gas tank with sending unit, no pump

It has no current suspension but I will provide one for transportation purposes you can keep.

TTR front manual tranny mount which needs to be welded in..

Pretty much everything I have left in my possession.... besides a few items like the body kit, toyo fenders, and any other performance parts I have listed in here.




Re: Remaining Parts that need to go!
Saturday, April 11, 2009 6:52 PM
Cody, have you been getting the emails about the 99 headlights?



Tinkles

2003 Cavalier 1SV
Bagged and Blown


Re: Remaining Parts that need to go!
Sunday, April 12, 2009 4:11 PM
Kyle no I haven't.

Update I'll let the body kit for $400 if you come pick it up...

Front/ Rear/ Sides.... I need this @!#$ gone. Start making offers everyone...



Re: Remaining Parts that need to go!
Monday, April 13, 2009 9:31 PM
Engine has been sold, and the prostock wing is pending...

Everything else is still up for grabs. If no one wants the shell by june I am going to scrap the @!#$ thing for metal. I don't want to look at this car anymore and be done with it. If someone is interested, just make me an offer at this point...



Re: Remaining Parts that need to go!
Monday, April 13, 2009 10:05 PM
^^
May be getting in on the skirts.


-M


Remember....syringes go in the RED waste basket.
Re: Remaining Parts that need to go!
Wednesday, April 15, 2009 11:27 AM
RD Fabs -Stainless Specialists wrote:Engine has been sold, and the prostock wing is pending...

Everything else is still up for grabs. If no one wants the shell by june I am going to scrap the @!#$ thing for metal. I don't want to look at this car anymore and be done with it. If someone is interested, just make me an offer at this point...


Cody - Lets take the shell, throw an OHV in it, have Ryan weld in a cage and run Brewerton Speedway on Friday nights




Brian


Re: Remaining Parts that need to go!
Wednesday, April 15, 2009 11:44 AM
Ha ha... I already had someone say they wanted to use it for that. But its missing quite a few parts to make it run and stop... lol.



Re: Remaining Parts that need to go!
Sunday, April 19, 2009 11:40 AM
Can i get parts to swap my 04 front to a 00-02 front???



Re: Remaining Parts that need to go!
Sunday, April 19, 2009 1:33 PM
whiskerbiscuit wrote:Can i get parts to swap my 04 front to a 00-02 front???


I have the 00-02 headlight brackets, white 95-02 hood, and 95-99 crush guard which can be trimmed down to fit the 00-02 bumpers.

You keep your current fenders, headlight harness, buy new headlamps and corners, and the 00-02 bumper. ( Or i have a type-J 00-02 body kit :wink wink




Re: Remaining Parts that need to go!
Sunday, April 19, 2009 2:12 PM
i got 02 headlights w/0 brackets too! and i'm looking to buy a set of 03+ headlights. trade



Re: Remaining Parts that need to go!
Sunday, April 19, 2009 3:25 PM
I'm also interested in the 99 Head lights, as long as the adjusters still work and they are still for sale. I only live about an hour from you so I could do pick up.



Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Re: Remaining Parts that need to go!
Sunday, April 19, 2009 6:37 PM
Adjusters work just fine, and I'm actually in Cortland, NY right now at college. I can meet you at my house one day however.





Re: Remaining Parts that need to go!
Monday, April 20, 2009 10:57 AM
Resurrected J wrote:i got 02 headlights w/0 brackets too! and i'm looking to buy a set of 03+ headlights. trade


Sorry but I got a set of headlights lined up already




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search