Due to the current situation, I am not listing pricing for anything, because this is a very public forum. Please PM me or EMAIL for pricing, if interested. Keep in mind I am also changing prices for previously listed items that did not sell if you would like to re-hash those.
If you would like pictures of anything I am listing, you can email me and I would be more then happy to email you pictures, or by direct connect via IM.
Please also keep in mind, some items I may need help removing and distance, time/labor with be factored in for your help. Also that some items may need removed to get to others and help may or may not be required.
Deliveries, or pick ups, or shipping can also be discussed via PM, depending on the item and distance etc.
Everything is also coming off of a 02 Z24 with LESS THAN 5,000 miles.
Happy Shopping and Holidays:
Prothane Trans mounts, Upper insert and Lower Mount
AEM Alt. Pulley
U.R. Crank Pulley
G.C. coilovers for Koni
Koni Reds (front/rear)
02 GM Bright Red fenders, doors, and anything electrical that can be taken off. (air-bags, dash etc)
Enkei ZR2 high-performance rims WITH BFG KDW's (235/40/17)
Gauge Pods 3 pillar
Auto-Meter: Oil pressure, Boost, A/F
Innovative Wide Band Gauge and sensor
Carbon Fiber Hood with Fiberglass frame (apprx. 23lbs)
95-99 Black Projector Headlights
95-99 Black corners
All sockets, Wiring for headlights/corners (still in packages from Dealer) to convert 00-02 front end to 95-99
GM Bright Red Trunk w/ shaved lock w/ APR wing
Electromotive TEC3, with wiring harness (with 1 extra connector and extra pins and lots of wire), direct fire coils, crank sensor and 3 bar MAP sensor
2.3 LO intake manifold (w/TB)
2.3 HO intake manifold (no TB)
2.3 HO cams and towers (machined for Power Steering)
2.3 HO head, P&P'd, 1mm over-sized stainless steel valves w/ titanium springs/retainers.
2.3 HO exhaust manifold (p&p'd and coated black)
2.4L Block bored .060 over o-ringed
JE 8.8:1 piston heads
Eagle Rods
RC 550 injectors
Aeromotive 700HP EFI Fuel Pump
Aeromotive A1000-6 Injected bypass regulator
Battery, Battery Box and cable for relocation to trunk
5 spd manual trans with 5 puck ceramic clutch
and anything else you may think of that I have missed.... has to go...
Damn I wished I didn't just buy another J for a beater...
Where in Michigan are you located?
I'm guessing Lansing. I live about an hour from Lansing. I would like to check out the parts for sale.
BIG BOOST
what all do you have for an 02 ls sport with an ecotec?
AEM Alt. Pulley
Enkei ZR2 high-performance rims WITH BFG KDW's (235/40/17)
Gauge Pods 3 pillar
Auto-Meter: Oil pressure, Boost, A/F
Carbon Fiber Hood with Fiberglass frame (apprx. 23lbs)
95-99 Black Projector Headlights
95-99 Black corners
GM Bright Red Trunk w/ shaved lock w/ APR wing
pics and prices
FOR SALE: (5) '95-'99 Z24 Rims
BigBoost: I live in Perry.... about 20 minutes East of Lansing.
ron m: My Z was one of the last 2.4Ls, not an eco.
Mr. Anderson: (sorry, the irony is I am watching the Matrix while reading this) PM me your email address and I will work on a list with pics and prices later tonight after I get done taking more off the car.
thank you guys for your interest.
do you have a picture of the rims and hood?
Im looking for you, but your not on AIM, so next time you get on shoot me a message alex2007us. i just got my cavy desprate to get the stock stuff off, and some new stuff on
cavy:bagged easystreet front, bags to be in in back soon, tubd, 18s.
celica gt-s:6speed, AEM Cold air, hi flow cat, muffler deletion, NGK plugs, Carbon fiber headliner, B&M shift kit, sportline 2.2" drop, factory rear disk brakes
1/4: 14.5sec. top speed: 145mph
i am interested in alt. pulley. email me at punkasfuc@yahoo.com...with a price if you would like
ron m: yes i have pics of everything.... i cant remember if you PMd me your email address, but give it to me again and i will send them to you
HaHa I've beat most of you to all that, but I'm still waiting for my prices for the list of stuff I sent him.
Email sent 2 of them actually
KevinP (Stabby McShankyou) wrote:
and I'm NOT a pedo. everyone knows i've got a wheelchair fetish.
Everyone that sent me an EMAIL... or a PM (as instructed from the beginning of the post)
should have replies
I hit you up on AIM . please get back to me about those items when you can. Thankyou .
01 Z24 Turbo MMMM YUMMY
who else was interested in the CAMS? aol decided to delete some of my "saved on aol" mail... so hopefully you are reading this an IM/PM/EMAIL me again
sorry.
updated list:
AEM Alt. Pulley
U.R. Crank Pulley
G.C. coilovers for Koni
Koni Reds (front/rear)
02 GM Bright Red fenders, doors, and anything electrical that can be taken off. (air-bags, dash etc)
Gauge Pods 3 pillar
Auto-Meter: Oil pressure, Boost, A/F
Innovative Wide Band Gauge and sensor
95-99 Black Projector Headlights
95-99 Black corners
All sockets, Wiring for headlights/corners (still in packages from Dealer) to convert 00-02 front end to 95-99
Electromotive TEC3, with wiring harness (with 1 extra connector and extra pins and lots of wire), direct fire coils, crank sensor and 3 bar MAP sensor
2.3 LO intake manifold (w/TB)
2.3 HO head, P&P'd, 1mm over-sized stainless steel valves w/ titanium springs/retainers.
2.3 HO exhaust manifold (p&p'd and coated black)
2.4L Block bored .060 over o-ringed
JE 8.8:1 piston heads
Eagle Rods
RC 550 injectors
Aeromotive 700HP EFI Fuel Pump
Aeromotive A1000-6 Injected bypass regulator
5 spd manual trans with 5 puck ceramic clutch
2.3 lo manifold. would it fir my 97 2.4? and is it the same kind of principal with th HO manifold?
hugs and hand pounds, peace
not able to use alt. pulley....however i am interested in piller pods....is it a full pillar replacement
the pod is already sold.
updated list:
AEM Alt. Pulley
U.R. Crank Pulley
G.C. coilovers for Koni
02 GM Bright Red fenders, doors, and anything electrical that can be taken off. (air-bags, dash etc)
Auto-Meter: Oil pressure, Boost, A/F
All sockets, Wiring for headlights/corners (still in packages from Dealer) to convert 00-02 front end to 95-99
2.3 LO intake manifold (w/TB)
2.3 HO head, P&P'd, 1mm over-sized stainless steel valves w/ titanium springs/retainers.
2.3 HO exhaust manifold (p&p'd and coated black)
2.4L Block bored .060 over o-ringed
JE 8.8:1 piston heads
Eagle Rods
RC 550 injectors
Aeromotive 700HP EFI Fuel Pump
Aeromotive A1000-6 Injected bypass regulator
5 spd manual trans with 5 puck ceramic clutch
Chris C:
PM me your email and I can send you pictures of the intake/TB for you to see.... they are the same priciple (LO/HO) but they are different.
and you need an adaptor plate made for it to bolt to the 2.4 head
Bump
Hey Mr. Boobs what to you still have for sale.
updated list:
AEM Alt. Pulley
U.R. Crank Pulley
G.C. coilovers for Koni
Auto-Meter: Oil pressure, Boost, A/F
All sockets, Wiring for headlights/corners (still in packages from Dealer) to convert 00-02 front end to 95-99
2.3 LO intake manifold (w/TB)
2.3 HO head, P&P'd, 1mm over-sized stainless steel valves o-ringed
2.3 HO exhaust manifold (p&p'd and coated black)
2.4L Block bored .060 over
JE 8.8:1 piston heads
Eagle Rods
RC 550 injectors
Aeromotive 800HP EFI Fuel Pump
Aeromotive A1000-6 Injected bypass regulator
5 spd Getrag manual trans with 5 puck ceramic clutch
Uni-body shell GM Bright Red, airbags w/ module, seats, headliner, rear speaker cover, a/c etc deck, doors, center console, carpet, wiring harnesses, new radiator... anything you can think of maybe I forgot, just ask.
I dont see them listed here but they are in the classifieds rear strut bar and sway bar, do you still have them and how much for them if you do.
