looking for a cradle - Mid East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
looking for a cradle
Monday, December 03, 2012 10:11 PM
seeing if anyone local has a GOOD subframe with control arms.
reason to believe the one on car is @!#$ up ever since i got it.



Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla


Re: looking for a cradle
Tuesday, December 04, 2012 4:40 AM
Matt, The pick-n-pull in Cleveland was selling them for $150 for ones they ones they brought up from the south.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: looking for a cradle
Tuesday, December 04, 2012 7:25 AM
I just went to my local place and got one for $70, most were rusted out but found a car that had a massive oil leak that preserved the subframe



Re: looking for a cradle
Tuesday, December 04, 2012 12:03 PM
hmmmz, im calling them now



Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: looking for a cradle
Thursday, December 06, 2012 3:18 AM
Well?




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: looking for a cradle
Thursday, December 06, 2012 2:40 PM
What model years are acceptable?





BeardLife / Club Awesome Reject Blog
Re: looking for a cradle
Thursday, December 06, 2012 7:50 PM
they no has.
ive been told from 96 and up


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: looking for a cradle
Friday, December 07, 2012 4:31 AM
All 95-05 subframes are compatible. The 2.2 OHV needs to have an 02 or earlier though because the exhaust runs underneath the subframe, and 03+ have an extra brace welded in place where the exhaust would need to be ran. If you are running an Ecotec or LD9, any subframe will work but an 03+ is ideal.




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!

Re: looking for a cradle
Friday, December 07, 2012 11:57 AM
thank you mike.


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Re: looking for a cradle
Saturday, December 08, 2012 5:14 AM
i got mine through LKQ about a month ago.


this is the start of my signature: have you read the RULES yet?
my carDomain updated 6/11/10 Forged and Supercharged


Re: looking for a cradle
Saturday, December 08, 2012 11:15 AM
im not worrying about it.
decided its in my best interest to get rid of this car.



Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla


Re: looking for a cradle
Monday, December 10, 2012 4:20 AM
http://glarparts.com/

Has three. They are about 1 minute from my house.









PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Re: looking for a cradle
Monday, December 10, 2012 6:09 AM
figured i need a pass control arm,
im not gonna worry about it.
i just want the car gone.
1500-2000$
takes it


Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search