Ok Peeps! If I can get enough interest, I am thinking about doing a mini meet/Dyno Day going. I know JRMarks has a few cars he needs me to tend to, and I would to see more people show up and do a few pulls, or even get tuned if you interested and time allows. I know this is the same weeked as CED, but so be it. I would be doing this at the same location that we had the Bash at a few years ago... Quick Rev! If you are interested, please reply.
P&P Tuning
420.5whp / 359.8wtq
I guess i have a date to shoot for. I will know more when the date gets closer.
Got dammit, will catch ya next year for a tune then. But I may come to hang out and chill.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
If only it wasn't 6 hours away.
I will be there if I can get a tune!!!
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
I have already check on flights to Dayton, and highly considering it.
FU Tuning
Roofy wrote:I will be there if I can get a tune!!!
Thats what I plan on doing while there!
Addicted to meth wrote:I have already check on flights to Dayton, and highly considering it.
If this works out, and you do decide to come, I gotta a place for ya...
P&P Tuning
420.5whp / 359.8wtq
We need to get together at some point Ryan, I don't know if you have anything in mind where we'll be close but I'm getting real desperate here and have actually listed my HHR for sale out of frustration.
Joe Schulte wrote:We need to get together at some point Ryan, I don't know if you have anything in mind where we'll be close but I'm getting real desperate here and have actually listed my HHR for sale out of frustration.
Damn, Whats going on with it?
P&P Tuning
420.5whp / 359.8wtq
Joe Schulte wrote:We need to get together at some point Ryan, I don't know if you have anything in mind where we'll be close but I'm getting real desperate here and have actually listed my HHR for sale out of frustration.
6 hours too far to drive to have him take a peek at it? or will it not make a long highway run?
We may screw around with Jareds car and c16 and I need my LNF with bigger turbo tuned! Should be a fun weekend. My try a local hang out and go to the track sometime as well!
You know anything about tuning Dodge Nitros?
OhForKavy (WhiteKnightro) wrote:You know anything about tuning Dodge Nitros?
Never done one, but not skeered to try... Do you have software or know of software that is compatible?
P&P Tuning
420.5whp / 359.8wtq
Glowing cav "Matt" has one. He had to go with an extra injector if I remember correctly.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
that one I might actually make it to, just left that area yesterday.. 3.5 hr drive...
I live close to dayton but i think ill still be on vacation then..
13.1 @ 115
a tune would be awesome. just need to see if i can get things together.
i would be intreseted. im in Akron, so only 3 or so hours.. sounds interesting, can you do anything mith the m45 tune?
QWK LN2 (P&P Tuning) wrote:Ok Peeps! If I can get enough interest, I am thinking about doing a mini meet/Dyno Day going. I know JRMarks has a few cars he needs me to tend to, and I would to see more people show up and do a few pulls, or even get tuned if you interested and time allows. I know this is the same weeked as CED, but so be it. I would be doing this at the same location that we had the Bash at a few years ago... Quick Rev! If you are interested, please reply.
Keep me updated on Facebook. I might want to just try and hand out.
Not committing but Im like 30 minutes away. Ill see what I can do. Probably no pulls for me though. A stock with bolt ons 4 speed 2200 is just going to embarrass me.
shawn smith wrote:i would be intreseted. im in Akron, so only 3 or so hours.. sounds interesting, can you do anything mith the m45 tune?
Yep. What mods do you have?
P&P Tuning
420.5whp / 359.8wtq
I really need to come to this if nothing else.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
im short 60# injectors fpr and 2nd gear to get tuned.
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
Well I'm out! Re-doing the Turbo setup on the flower to something more ummm..... "professional looking" and with my work schedule, I won't have it finished before then.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Can't wait to see it Roofy!
P&P Tuning
420.5whp / 359.8wtq
