Parting Out
I have a complete Hahn Stage 2 Turbo Kit, I'm not willing to ship this because its too expensive and runs the risk of being damaged. 20g Turbo has low miles and is in great shape. Full 3 inch mandrel bent turbo-back exhaust. If you are serious about the kit please PM me for details.
Not willing to part out the kit at this time and there are extras I can package along with it like, Catchcan, RC 750 injectors and gauges.
Other Items :
Polished 61mm Domestic Concepts Eco 2.2 Throttle Body (Could use a re-polish, comes w/ sensors) : $160 shipped
Lower Mount Dog Bone, Powder Coated / with Prothane Bushings (Compatible w/ 3rd Gen J-Bodys) : $35 shipped
Custom Door Gauge Pod : Has one small crack in fiberglass and could use a repaint. : $30 Shipped
Custom Door Gauge Pod (un-completed) : Needs test fitted and needs fiberglassed and finished : $15 shipped
Custom 3 Pod Dash Bezel : Complete but could use a scuff and repaint. One mounting tab is broken. Comes with rubber gauge rings : $65 shipped
Custom Yellow Painted Dash Bezel : Trade for stock / make offer
Custom Fiberglassed Dash Bezel (Was going to mount pods in dash similar to SRT4 boost gauge) : Trade for stock / make offer
Customer Radio Adapter w/ slot for boost controller (Could use a refinish/repaint) : $15 shipped
Grounding Kit (Ends need cleaned up) : 25 Shipped
Fog Lights with Switch ( Lenses need refinished, missing a bulb) : $35 shipped
Jbody Starter (Low Miles) : $30 Shipped
I haven't got to suspension yet but may be leaving it on the car.
There may be stuff in my profile I'm willing to sell but have forgot about.
Anything sold here is being sold as-is so its important you ask questions first if your wondering if something may fit your application. I have tried to faithfully represent everything listed.
Shipped Prices are Lower 48 only.
Please PM me if you have any questions.
Thanks for looking!
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
bump for a good guy
Proud member of Jbody of Kentucky ... Click on sig to go!
Eric if you ever, ever ever part out your LS sport rear bumper let me know!! mkay?? lol
Thx man
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
It might be a shot in the dark but you wouldn't happen to have a wideband would you?
Paying someone to install parts and bragging about it being fast, is like watching someone bang your wife and being proud to raise their kids.
Tim look at arrivals thread, below this one
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Eric if you ever, ever ever part out your LS sport rear bumper let me know!! mkay?? lol
Thx man
NP, isn't there another guy up north in Ohio selling one right now?
Transporter7220 wrote:It might be a shot in the dark but you wouldn't happen to have a wideband would you?
Its up on Ebay right now : 230532008404
Thanks
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
Eric the only guy I know who is selling one is Nuebreed in Michigan.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Rousseau9099 wrote:Ill buy the door pod
i already pmd him on the completed one.
All PMs being replied too in order I received them. Items go pending when someone offers to PP me funds. I usually ship out the next day.
Thanks everyone for the interest, was not expecting so much.
Custom Door Gauge Pod (Pending)
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
how much for a hug?
Proud member of Jbody of Kentucky ... Click on sig to go!
JoeyDaBomb wrote:how much for a hug?
Free to you
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
i got pp ready for the 3parts i asked about.
will be waiting for my return pm. funds ready to go.
Custom Door Gauge Pod (Sold)
Custom Door Gauge Pod - Unfinished (Sold)
Dog Bone Mount (Pending)
Stereo Adapter (Pending)
Also have a bare Eco fuel rail : $20 shipped
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
sent few pms forgot to add notes thanks.
Where are you at in Cinci? Just curious.
TheSundownFire (GME Chat) wrote:Where are you at in Cinci? Just curious.
Hamilton
I have a Silver Eco Turbo Tech Upper Mount also, its in good condition : $60 shipped plus your stock as a core
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
stand up guy.
JBOK.org / J-Bodies of Kentucky
sweet deal. i got my stuff today woo hoo. i pmd you ill be taking that other part we discussed if still avaible.
Cutom Door Gauge Pod (Sold)
Custom Door Gauge Pod - Unfinished (Sold)
Dog Bone Mount (Sold)
Stereo Adapter (Sold)
TurboTech Upper Mount (Pending)
Would be willing to trade my OEM Style JSP 03-05 CF hood for a 03-05 hood in factory black.
Thanks Ben!
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
hood have to be in good shape? lol
my 04 black hood has dents in it from the OEM strut mounts bending and the rods poking the hood from underneath. other than that its in decent shape
Ben D(Silver J on 1Nines) wrote:hood have to be in good shape? lol
my 04 black hood has dents in it from the OEM strut mounts bending and the rods poking the hood from underneath. other than that its in decent shape
Sorry I don't want one with damage, because I don't feel paying to get it fixed
Seems body work it more expensive than new parts. I just got a quote of 65 dollars for a brand new base model bumper cover from Besslers... Wow!
Hahn Stage II - Mitsu TD06-20g |3" Turbo-back Exhaust | 61mm Bored TB |
HP Tuners | Innovate WB02 | Spec Stage 3 | Team Green LSD | TurboTech Upper | Full Addco Sways | Sportlines & Yellows |
