Okay here is the deal guys, I have a @!#$ ton of ecotec parts laying around. Most I have been keeping for a project that I probably am never going to do.
Pictures will come, but not for a few days, Those of you who know me, know these parts are legit and nothing to worry about.
Please ONLY CALL/TXT me if you are serious. 763-234.86.70
Name is Ryan
Full Complete 2.2 Ecotec Long block
No manifolds but other wise complete
Ran when it was pulled, ~80k miles on it (i believe) This was Josh's old S/C motor.
$300 picked up ONLY, will not ship.
Bare ecotec block/main girdle $20
Perfect for an all out build or if you cracked a sleeve.
LSJ Complete Head. $400
Complete! cams, valves everything
LSJ Rotating Assembly
Crank $100
Pistons $75
Rods $125
Stock LSJ 38lb/hr injectors $60
60lb/hr Seimens Injectors used for 20k miles I made 280whp on a conservative tune with these! $125
LSJ Spec Aluminum Flywheel used $75
I have a lot more parts LMK if you need anything else I have a @!#$ ton of ecotec parts
I need all this gone everything is
OBO
What engine are the 60 for? L61, LSJ?
interested in the head. does it have the valve cover too?
Yes sir as complete as you can get
Any hits on the Flywheel yet?
Sorry I don't come on here much, I live in blaine.
BUT I recently had to use the Flywheel myself, my clutch decided to break a spring in it and destroyed my old Aluminum Flywheel..
LSJ head is gone for $400
60's are currently being used until someone really wants them
flywheel I needed..
everything else is up for grabs..
I will ship the engine if buy pays and sets-up shipping. I can load it onto a crate at my work and have it picked up LMK
hey, if you wanna send me an email about the lsj injectors, i can buy them asap.
do you have an ecotec manual trans
