All for sale -
- Complete Koni Sport Kit - has less than 1500 miles on the complete kit. Comes with everything except nuts/bolts (these can be used from your stock suspension). I'd like to see $575 considering the cheapest I've found them on the net is $679 @ turbotech, and that's w/o mounts. Possibly negotiable, and I'd like to *NOT* ship if at all possible. But again, negotiable.
- Progress 22mm Rear Sway Bar - Has 0 miles, but is mounted on car now. Comes with all hardware to mount. I'd like to get $120 for this and same shipping situation as above.
- Stock Isuzu 5spd w/ ~164xxx miles - Ran and shifted smoothly from the 1996 Sunfire GT it was pulled from, but it has a lot of miles on it and I don't believe it was ever rebuilt. I pulled it to swap it w/ a 2.4 into my Cav, but I'm going a different route now. Considering mileage, I'd take $125 for this. Definitely no shipping on this, it would be ridiculous.
- 1995 2.3 Intake cam (half of the "secret" cam swap) - best offer
- 2.3 LO intake manifold w/ all sensors and TB - best offer
- 2004 Ecotec - ~25xxx miles. Short block and complete head, but no manifolds or electronics. Head has been removed from block - $350 OBO
- Miscellaneous parts from a 1996 Sunfire GT - Rear bumper, All glass (except windshield), doors, trunk, tail lights, trunk bezel, gas door - best offer
I also have a complete disassembled 96 2.4 - as I said I'm going a different route, so I don't need any of it. The oil pump is gone because I was going to do the 2.3 pump swap, but never sourced the parts. It does have a working coil pack/ICM and an extra IDI cover. A couple valves are bent as the result of them laying near my garage door, then me closing it... Also I started porting the exhaust side of the head (only 1 port so far) - nothing serious, just gasket matching.
For those wondering about my buying/selling rep - contact DrPaul84 or Joe Schulte. I bought some Toyota tails from Paul about 3 years ago, and just sold a set to Joe earlier this year/late last year. I realize that's not a massive track record, but it's all I have.
PM me or e-mail me for details or anything else. Pics will be posted tomorrow sometime after 5pm CST
Also have a set of 15" Rota Sub Zero's - weigh 12.9lbs each. Great for track use or just to save gas mileage. They have less than 1500 miles on them, and don't currently have tires. Paid $500 Shipped, would like at least $375.
I'd rather not separate the suspension, and I'm not really up for trades right now. The Cav is going back to as stock as possible so I can just drive it to/from work. That, and I'm trying to get a 1975 280z from a local guy. Pics are en route, imageshack is being slow...
I do, but it's just a shell. The only things that are good still (or are there still) are the doors, trunk, trunk bezel, all glass (windshield has a crack), tails (one is chipped), rear bumper, and steelies. The motor and everything 2.4 related above is from that car. I stripped a bunch of stuff to put on the Cav.
I took some pics of everything yesterday, but it was cold so I didn't pull the car out of the garage AKA the pics suck. Only 20 or so uploaded so far, the rest will have to wait until tomorrow after work, but here's the gallery -
http://profile.imageshack.us/user/screamsayonara/
would you sell just the block without the head or anything. im in need of a spare block if there is nothing wrong with it
I suppose I could. If you want to PM an offer, feel free. I'm in Desloge, Missouri 63601 - pretty far from you
Koni's are pending.
All pics from Tuesday are uploaded.
how much are you looking to get out of the block
Bonnett wrote:how much are you looking to get out of the block
I'd like to see $200, but shoot me an offer. I'd like to finally sell this thing.
...Blakd Eco... wrote:whats the body condition of the fire man
Fair to moderate. It's red w/ a black roof (factory) and the front end is missing (now on my cav). The fuel and brake lines, wiring harness, interior - all gone. The front windsheild has a crack in it, it kinda looks like someone shot it w/ a BB gun. It has a title, but there's a penalty on it or something. You'd have to ask Jared about that part, because I don't remember.
And if Bonnet doesn't need the Oil pan or Head, their yours.
That's cool. I'll let you know about the head and oil pan when Bonnett gets back w/ me.
well for the block, im not looking for anything internally, you keep the crank and rods and pistons and all bearings, i just want the bare block, the main girdle and the oil pan. is 200 the price for all that
Is the Sway Bar still available?
How much shipped to 60543?
Bonnett wrote:well for the block, im not looking for anything internally, you keep the crank and rods and pistons and all bearings, i just want the bare block, the main girdle and the oil pan. is 200 the price for all that
Yeah, but don't be shy to make an offer. I want to finally be rid of this stuff. As soon as all my parts are out of the garage, I can start getting parts for the Datsun I want
Matt Linke wrote:Is the Sway Bar still available?
How much shipped to 60543?
Yep, still available. I'll try to get a quote for you tomorrow.
