do i put the green wire on the 2 point pink or 6 point purlple or is it different
i have 2cyl on it what wire do i connect
you need the autometer 9117, i just installed it on my car, ground it and run your tach sender wire to the grey on the box and there are two red wires, one with a stripe, you cut the pink wire going to your coil, and wire the two reds off the box to link the cut pieces together, the red/stripe goes tword the coil, no calibration needed, the 9117 tach adapter cost me 80 bucks, any questions just pm me as i have the diagram.
jason
but then nothing else works, lol