1992 3.3 v6 - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
1992 3.3 v6
Saturday, February 11, 2006 9:20 PM
What usually goes bad on this 3.3 v6 engines.

i can i can get one with 139,000 miles on it and it does not run good it outs at idle and blows a lot of smoke out when WOT driving it.




Re: 1992 3.3 v6
Saturday, February 11, 2006 9:24 PM
Well...why would you want a motor that's already bad?



www.kronosperformance.com / 732-742-8837

Re: 1992 3.3 v6
Saturday, February 11, 2006 9:28 PM
IDK FREE!!!



Re: 1992 3.3 v6
Saturday, February 11, 2006 9:29 PM
3.3?

GM never had a 3.3... 3.1 maybe...





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: 1992 3.3 v6
Saturday, February 11, 2006 9:32 PM
i think buick had a 3.3 in the early 90's....



Re: 1992 3.3 v6
Saturday, February 11, 2006 9:34 PM
Caviboy90 wrote:IDK FREE!!!


Eh, sounds like a waste of space if you do take it...



www.kronosperformance.com / 732-742-8837

Re: 1992 3.3 v6
Saturday, February 11, 2006 9:38 PM
yea in the Buick's they had a 3.3



Re: 1992 3.3 v6
Saturday, February 11, 2006 9:38 PM
3.3 is basically a smaller 3.8L, not as strong in the lower end, but bulletproof on the topend. When they first came out, they made more power than the 3.8L. but they were short lived motors, like 3-4 years.

I've read you can take a 3.3L top end and mate it to a 3.8L bottom end and have a bulletproof motor that makes a pretty good amount of power. I don't know if this is true or not.





Re: 1992 3.3 v6
Sunday, February 12, 2006 10:01 AM
Caviboy90 wrote:i can i can get one with 139,000 miles on it and it does not run good it outs at idle and blows a lot of smoke out when WOT driving it.
Well..... smoke is a sigh of head cracking or head gasket in bad... needs to be looked at and replaced. or try a can of k&w block seal. worked for me..
Re: 1992 3.3 v6
Sunday, February 12, 2006 8:02 PM
well the prob with this 3.3 is a blown intake gasket.




Re: 1992 3.3 v6
Monday, February 13, 2006 10:12 AM
The 2.3 motor was one of the best engines GM ever built. Take a walk throughany junk yard, I have seen them with 300+K on them and still run. My friend has one with 230K and runs great. Get on ebay get a gasket kit (40$) do all the gaskets on the motor while it is out of the car. Try that, should be a quick car.



http://members.cardomain.com/vertz24 1998 Z24 Convertible

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search