helpppp hurble problems. nightmare - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
helpppp hurble problems. nightmare
Friday, October 28, 2005 4:53 AM
ok so i did the secret cam swap on my 01 z24


first off the cams are timed right so rule that out

ok the car is misfire at an idle badly the scanner read 12 times per cylinder per min.

the car has new plugs gapped right, new coil pack housing and new boots

the temp gauge drops to zero when i floor the car. takes a few min to go to normal. no check engine lights unless it has been idling for about 3-4 min. the engined are only for multiple misfires.

could to computer be going bad?




Sorry...
You have been banned from posting on this site as of 2005-09-21

00:33:32. This ban will expire 2005-09-28 00:33:32 Pacific Time.
Reason: Comments over the top regarding Jordan Kruger and other members in Versus. Also, if you have a problem with a member e-mailing you, do not bring it into the forums.

If you believe this to be in error, please contact us.

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search