im going to have to do a rebuild of my 2.4l ld9 and i figured i should put together a tutorial covering most of the questions that most people have.
does anyone have any ideas of what i should make sure to cover?
i figure....
wrist pin install
ring install
piston install
crank install
oil pump install
valve and spring install
lifter install
cam install
water pump install
timing chain install
spark and cover install
harmonic balancer install
engine install
ill show the gaskets and such along the way too.
is there anything ive missed?
z24 - CAI - Magnaflow Cat - PaceSetters
--exhaust and unorthadox pulley soon
oh yea. good one.
+++flywheel install.
z24 - CAI - Magnaflow Cat - PaceSetters
--exhaust and unorthadox pulley soon
- what to disconnect, where all the bolts are, etc. before removing the engine
- list of required tools
Just in time, I'll be rebuilding mine very soon, got all the parts.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
i think ill just list the things to disconnect because i have everything already taken out and i wont be able to take the pictures.
yea tools sounds good
z24 - CAI - Magnaflow Cat - PaceSetters
--exhaust and unorthadox pulley soon
this would be good to help me connect all the sensors back once i put my LD9 back in.
GMR has got nothing on this
i have pulled my motor 3 times now and the sensors are not bad really. The hardest part is getting the motor out with the tranny still in cause the crank pulled gets stuck!!!!
"sometimes the respect is more important..."
what happened to this guy lol
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
buuuuuuump
No response to e-mails or PMs. This tutorial would come in handy since I'll be rebuilding my engine.. as soon as this tutorial is out, or I get a Hayne's.
2001 Olds Alero (LD9)
650 whp / 543 ft-lb
@turboalero
