I got mine today. i saw a video of a guy that did his and he didnt support the engine. Does thios need to be done to replace the insert?
Are wanting to install a poly mount insert like this one:
If so I would recommend putting the block of wood on a floor jack just to brace the motor, Also you are going to have are to remove, The 3 nuts on the metal bracket, Then the brack pops off then, Undo the 2 bolts in the other rubber mount, Then Make sure u got some dish soap, To put on the poly mount to allow it to slide into the other rubber mount. once done, re install in reverse method,
goos luck.
the lower mount will support the engine while you do the upper mount.
14.82 @ 97 mph
