how to change the head gasket? - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
how to change the head gasket?
Wednesday, May 09, 2007 1:07 PM
Does anyone know how to change the head gasket on a 98 sunfire? Is it an easy task to do in a couple of hours? The reason I ask is because I recently changed my spark plugs and I noticed oil on them and the car also has a rough idle, any ideas?


http://registry.gmenthusiast.com/images/jzamarripa/PICT0006.JPG

Re: how to change the head gasket?
Thursday, May 10, 2007 6:00 AM
Oil on the plugs does not directly equal a head gasket leak. Easiest visual test for a head gasket leak is checking for the presence of coolant in the oil, which will make the oil look like chocolate milk. If you don't see this, to confirm, have a cylinder compression test run. If all 4 cylinders are at an acceptable level and equal, it is likely not a head gasket.




1989 Z24 Convertible - Dust Covered
2006 tC - Dust Covered, but driven more
Re: how to change the head gasket?
Thursday, May 10, 2007 7:50 AM
Agreed ... white smoke from the exhaust, rough idle, and I found my oil milky (all tell tale signs). Head gasket! $100 for a gasket set and $70 for new head bolts and not being a mechanic with some good guidance, 3 days and a few beers (lift and tuck technique) Regards, Irv


911 ... got fire?
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search