Looked in Chilton manual, nothin. Whats the Lower Engine mount torque specs? Im under the car right now.

pfftttt, just tighten it until it wont go anymore and them some..











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

alright cool, sounds right. I looked in the haynes manual (same company as chilton, go figure) and it says to add some thread sealant and "tighten till secure". Tanx WhiteCavy.

Tighten it to yield. LOL
I try and look it up later.
Ok here you go.
Engine Mount Bracket Adapter to Block Bolt Auto Trans................................... 44 lb ft + 60°
Engine Mount Bracket Adapter to Block Bolt Manual Trans...............................44 lb ft + 60°
Engine Mount (right hand side) to the Body Support Bolt...................................49 lb ft
Engine Mount (right hand side) to the Body Support Nut....................................32 lb ft
Engine Mount (right hand side) to the Engine Mount Bracket Bolts..................46 lb ft

Man the LD9 overview "Sticky" will never be a sticky. I mean it never has any useful info.
~~shakes fists~~




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO