how do I cut the bottom grill out of my 05 cavi with out messing the paint up
z28guy(KGM BEOTCH)
I used a cutting wheel on my dremel to cut my bumper for inserts. Make sure you keep the speed low or you end up melting your way through instead of cutting.
*****************************************************************
"The J's weren't designed to be sports cars, the suspension sucks, the brakes are tiny, and the target market for our car doesn't need to be able to do any more than 65mph." - Shifted
A more accurate observation has never been typed. These should be the starting points before any serious performance modification. What's the point of making a serious performer if you can't control it's power?
I used a dremel with a carbide cutting bit, mine was on high speed, with a carbide bit it cuts fast enough and does not melt. Tape your lines off and be as steady as possible, mine does not look excellent up close but 5ft or farther back looks real good.
<aDdiCtEd 2 BoOsT>...EcOtEc...Yes it has 4 cylinders, yes it will beat your 8 cylinders!!!
thanx guys I ll try it
z28guy(KGM BEOTCH)
anyone got pics
z28guy(KGM BEOTCH)
IF YOU'RE STEADY HANDED, YOU CAN PROLLY USE A GOOD SHARP RAZOR BLADE...JUST BE REAL STEADY.
oops, sorry for caps
