found a way to make stock projectors - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
found a way to make stock projectors
Saturday, May 06, 2006 7:37 PM
once you have the light split instead of putting a clear lense over the round turn signal. take a projector driving/fog light of the correct size and jb weld it in place. then run your low beam wires to the driving light, and splice the highs to the regular 9007 bulb. then run the turnsignal wires to the marker light in the corner....and poof your done. but.....MAKE VERY SURE THE DRIVING LIGHT IS POINTED CORRECTLY (SO YOU DO NOT BLIND OTHER DRIVERS) BEFORE THE JB WELD SETS.



Re: found a way to make stock projectors
Sunday, May 07, 2006 8:25 AM
pics............
Re: found a way to make stock projectors
Sunday, May 07, 2006 12:02 PM
Hmmmmmm...pictys would be nice X2..

I also want to know if its legal or not....






Silver Stripey makes your Day!
Re: found a way to make stock projectors
Sunday, May 07, 2006 1:15 PM
SiLvEr StRiPeY 04 wrote:Hmmmmmm...pictys would be nice X2..

I also want to know if its legal or not....


even if you were to buy projectors, there not legal. its illegal to change your headlight setup




Re: found a way to make stock projectors
Sunday, May 07, 2006 3:23 PM
jWagg wrote:
SiLvEr StRiPeY 04 wrote:Hmmmmmm...pictys would be nice X2..

I also want to know if its legal or not....


even if you were to buy projectors, there not legal. its illegal to change your headlight setup


That's a rather large blanket statement considering there are 51 different sets of vehicle laws in the US alone (10th Amendment and all that). Do you mind citing a couple of these laws to back up your statement. The laws I've read have only dealt with light output and dispersal, but I haven't read light laws in depth. Please educate me.
Re: found a way to make stock projectors
Sunday, May 07, 2006 3:49 PM
blaine smith wrote:once you have the light split instead of putting a clear lense over the round turn signal. take a projector driving/fog light of the correct size and jb weld it in place.


I wouldn't wanna use a projector fog light. Find a driving light instead


---------------------------------------------------------------------------------------------------------------------

^^^ My 04 Projectors ^^^
Re: found a way to make stock projectors
Sunday, May 07, 2006 3:57 PM
then techincally it would be illegal to swap in hid conversions, black housing headlights, clear corners, altezza tails, toyota tails. you can buy pre-fab projector headlights, and theyre completely legal in most states. i asked my friends dad, whos a trooper and he said as long as they are pointed correclty, do not block the light or are NOT colored (green, red) and do not blind other drivers. most cops couldnt say a thing......


Re: found a way to make stock projectors
Sunday, May 07, 2006 3:58 PM
Changing your headlight setup isn't illegal unless your light flares and blinds other drivers (i.e badly setup HID's), it has to be 22 inches above the ground technically, and there has to be side markers for turning lights.
Re: found a way to make stock projectors
Sunday, May 07, 2006 4:08 PM
umm


just pay Josh/Izn Trbl

or

do it right



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search