eyelids would make that look pimp.. only thign i see that could be added to the sexy a$$ car
i would take off the pontiac emblem in the front and get some eyelids
I think that kit is ok, but it is too round to pull off the splitters.
I'd say mold you some eye lids on there.
j
so you have a body it and a 4" wheel gap....
I wouldnt be worried about a splitter...
Team Altered Car Club
Ken96Z wrote:so you have a body it and a 4" wheel gap....
I wouldnt be worried about a splitter...
as cruel and assish that sounds its true.
try to get a 1/4"thick piece of abs and cut i so it covers the very bottom of the bumper even adding a a small lip would keep your from blasting the edges, then you have a scrape shield
I love the rear bumper. Front need some eyelids or a different hood. Not agressive enough looking imo. Car looks good so far.
I'd stay away from a splitter with that front. Too round looking.
i know you said dont suggest lowering it b/c it scrapes... but it needs a mild drop. if you're careful its not so bad. just learn how to drive on a dropped car. my type j sides and rear are no higher than your kit, and i was dropped 3 inches with no problems. just have to be careful. honestly, id rather a car be lowered on a stock kit than up all the way with a full body kit.
screw the splitters, buy air ride for it..
www.DomesticTuners.com 'The Place To Tune Your Domestic'
Do eyelids but have the curve a little to go with the lines in the bumper. Would be a little different.
<img src="http://www.j-body.org/registry/nothing13/thumbnail_sig-jpeg.jpg">
Crystal(CrazyCavGirl) OR Jacob wrote:Adam (StealthCavalier) wrote:i know you said dont suggest lowering it b/c it scrapes... but it needs a mild drop. if you're careful its not so bad. just learn how to drive on a dropped car. my type j sides and rear are no higher than your kit, and i was dropped 3 inches with no problems. just have to be careful. honestly, id rather a car be lowered on a stock kit than up all the way with a full body kit.
x2
x3
RIP Kasey Burleson, and get well soon Chris Shelly
IMO...the car looks dope as is
whiteboy projectors would be pimp!
Portage, MI
lol well....I see that most of ye think that I need a drop. Yes i do agree i need one. But there are so many steep driveways into stores and homes and crap. Not to mention speed bumps.....Even now i have to go in these driveways on a slant cuz if i go straight in my front and back bumper will rip off. If i dropped it 3 inches it would most certainly rip off....
ruen (Ryan Bauman) wrote:IMO...the car looks dope as is
whiteboy projectors would be pimp!
Indeed them projectors would be pimp.....i must say i saw that post for the first time last night and saw how they looked.......ahhh. So nice. If i had 300 to spare perhaps i would. But I dont. Also, Im alil concerned why you said my car looks dope....is that bad? lol. Sorry...
PS: im stupid....whats IMO?
Keep comin with the ideas!
dope= fly ride
IMO= in my opinion
I saw the pic and first thing that came to mind is projectors.
Projectors & eyelids + Air ride.
Don't get splitters. The car would just look wierd with that round body kit plus those. Get those three things, and you'll have one of the hottest fires on the org.
eyelids would be nice, so would projectors. For eyelids tho wouldnt i need a whole new hood ? That would blow.
no, you either weld them on a steel hood , or mold them in with figerglass on a f/g one.
and it you was to do eyelids, do them straight, not curved like mentioned above. i think curved would just make it look like you accidently messed it up.
j
twiztedcav05 wrote:i would take off the pontiac emblem in the front and get some eyelids
ill second that, but your car is absolutley GORGEOUS, so either way, whatever you choose, good work!
_________________________________________________________________
this useless post brought to you by the alcoholic known as LUNDiS
car looks great leave it as it is.
maybe not today, maybe not tomorrow....... but some day
