I bought acarbon fiber spoiler and the clear coat is completely off in a couple spots. I want to know what the correct process would be to fix this as I want to do it myself.

What grt to start with. What do do about the spots where ther is no clear coat left. etc.

Thanx Guys

Oh and I bought the spoiler this way cause it was nice and cheap. Help me fix it

well i would D.A.. with 180 then 240 you need to remove/feather the old paint
prep it then prime it
wet sand with 320 then 400 then 600 prep it again apply sealer apply base apply clear
waiting 5 to 10 min`s between coats of course
real simple fix


can i haz bondo