I have the type j kit from rksport i was wondering what temperature urethane will start to melt/deform at. I put a muffler on and want to know how far i should keep it from my back bumper
I have the type-j with rk's magnaflow exhaust. I would keep the muffler at least an inch down, i had to lower mine down cause i seen that it started to deform under neith. You might need more clearence but you might not. Mines at an inch... hope that helps
2004 Turbo cavalier 11PSI and blown!
dont have that problem with FIBERGLASS
Sinister Ambitions
yeah and when you scrape on the ground and crack your fiberglass we dont have that problem with URETHANE. beitch. lol.
ive had fibreglass and urethane.........
cursed every word in the dictionary with fibreglass
I have both lol
__________________--------------------------____________________
Team: NONE RIGHT NOW
Sponsored By: Pro Trucks
Work Being Done By: creative customs
Stuff for Sell:
euric dinkins wrote:dont have that problem with FIBERGLASS
actually you do. my drift rear where the muffler cut out is was too small. i thought i cut it out big enough for clearance. when it was on the car it had just enough clearance but when the car was running, i guess the vibrations from the exhaust caused it to rattle a little. eventually, it formed itself around the muffler since it was so hot and now it doesnt rattle.
