like you all prolly know i just got my car back from the shop after a new paint job. recently i discovered what looks like paint primer on my back glass. not much but noticeable to me. do any of you now a way i can remove this... like said its not that noticeable but i can see it...
thanks
<a href="http://www.liquidgeneration.com" target="_blank"><img src="http://www.liquidgeneration.com/quiz/images/crackaasswhiteboy.jpg" width="403" height="165" border="1">
I usually use regular gas to clean any paint when I get it on windows. I used to use acetone but I heard gas is safer on the glass. Just don't use too much. Put a little on a rag and wipe off the primer.
Depending on how much primer is visible, a soft damp cloth with paint remover will do the trick.
<a href = "http://www.caldocustoms.com"><img src = "http://www.caldocustoms.com/images/caldocustoms.gif" border = 0"></a>
How about a razor blade?
<img src=http://www.consumptionjunction.com/i/default03.gif>
ill try all of these... i just weanted to make sure the blasted stuff would come off...
<a href="http://www.liquidgeneration.com" target="_blank"><img src="http://www.liquidgeneration.com/quiz/images/crackaasswhiteboy.jpg" width="403" height="165" border="1">
steel wool would be the easiest, go to a paint supply store and get some very fine steel wool. that is, if the other methods dont satisfy as im the 4th person suggesting something lol
On the other hand....you have other fingers.
THE WORLDS FIRST GAY POTATO!:Amaze and delight your friends, dress it up, take it to the cinema or just sit and admire it's firm silky buttocks and when your bored of it .. lob it in a casserole dish with some onions and carrots.
I would assume that it is on the outside. The easiest way to remove paint from the outside glass is to use a razer blade. I use to be a porter for a new car dealer and did this all day.
like a razor blade or one of those disposable razors?? and do you just scrap cause wouldnt that scratch your glas?
<a href="http://www.liquidgeneration.com" target="_blank"><img src="http://www.liquidgeneration.com/quiz/images/crackaasswhiteboy.jpg" width="403" height="165" border="1">
razor blade, like a box cutter. just do it carefully, its not to hard. just lightly go over the surface
ok ill try it out... thanks all.
<a href="http://www.liquidgeneration.com" target="_blank"><img src="http://www.liquidgeneration.com/quiz/images/crackaasswhiteboy.jpg" width="403" height="165" border="1">
