Anyone know of a common car with a TB size of 63mm or bigger? Looking for a few of them for a project.
now The L61 Powered Fiero
PURE DICE, PURE Design.Innovation.Creation.Excellence.
^Jesus thats big, i need something a bit more common and plentiful than that, i dont think the yards around here would like me ripping those off lsx motors
now The L61 Powered Fiero
PURE DICE, PURE Design.Innovation.Creation.Excellence.
You can probably by a used LS1 tb for a decent price from someone who has gone bigger.
05 M6 YJ GTO 1 of 447 12.523@111.30
series II 3800's have a 65mm tb.
Andy
it's not how fast you go, it's how you get there that counts.
ZZP XP cam, 1.6 rockers, 105# springs, speedbuilt FWI, 3.3" modular pulley, TOG headers,
3" exhaust, flomatched injectors
'97 GTP 14.06@100.6mph pre cam w/ 3.5" pulley, I/E
What about LT1s?
05 M6 YJ GTO 1 of 447 12.523@111.30
lt1s are twin blades
96-99 vortec motors , 4.3 , 5.0 5.7 , 7.4 , are fairly common , as are all the LSx tbs , usually range 70-75mm
5.0 ford cars use a single and i think are in the 60-70 range
modular stangs.
On the other hand....you have other fingers.
The Redneck wrote:my 88 camaro is on blocks trying to become a race car,
redneck is a state of mind
Thats right, I forgot about the twin blades.
The Grand National/T-Type/Turbo T/A/ Cyclone/typhoon
05 M6 YJ GTO 1 of 447 12.523@111.30
Vortecs even the 4.3L have 70mm+ TBs??? Thats the type of motor im looking for.
3800s are next in line of common motors round here
thanks guys
now The L61 Powered Fiero
PURE DICE, PURE Design.Innovation.Creation.Excellence.
