SOme of you may remember me posting up about my buddy Albert's Talon. Well he made a new vid summing up the '06 season, only problem is he made it alittle to soon, in the vid theres a couple runs from the Subaru vs Mitsu shootout, those runs are on street tires with a head gasket on its way out and leaking hahahah. He did end up breaking the 9 second barrier this year 9.98 @ 142 with slicks, and the bottom end in not so good condiotn, still the leaking head gasket and the CLD test was showing 13% leakage on the best cylinder and 35% leakage on the worst and with the other 2 not doing the greatest either, but it did crack nines..... I can't wait till next year with a newly rebuilt motor, that was just the head and drivetrain rods and pistons, stock crank, no o-rings int he block, nothing special, just basic a build up and it held up to a 9 second pass not to mention 20K miles of hard street abuse and tons and tons of 1/4 mile runs. Eeythign you see in the vid he either installed or build on his own, he mad the cage, the turbo manifold, the intake manifold, the coil over plug igniotn setup with the plate and all, the downpipe, the intercooler (he buys cores and makes custom intercooler kits) ect...
Enjoy 
<--- click for vid
thats pretty damn quick... A damn job well done too on doin everything himself.
I love the 4g63 and all dsms. Awesome car
Where is he from? I see that he raced at cordova that last run. how far is he from me?
he far form you, hes liek a 5 minuet drive from my house
Awsome car!
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
