I got a 95 cavalier ls 2.2L with a manual transmission.Ive recently swapped in a 2.3 quad 4 H.O and ran into some problems on the wiring.One problem is finding the factory harness out of a 95 z24 is like trying to find a needle in a hay stack, and finding the ecm pinout is just a bad. I already have the 2.3 ecm but the car wont run off it.I modified my origional 2.2 harness to run the 2.3 had to solder on some new connectors for the map sensor fuel injectors and extend a few wires due to their new location,all that was nothing.where my problem lyes is the 2.2L uses a 3 wire ckp sensor and the 2.3L uses a 2 wire ckp sensor.The motors running off the 2.2 ckp but its not right.Ive got the ckp sensor rigged in on the motor to make it run.I had to use coil packs to make it run but I like that better anyways.but if anyone knows a way around wiring the ckp sensor your advice would be greatly appreciated.also any links for th ecm pinout would also be appreciated thanks

Cross posting is not allowed. Please read the rules.

sorry man im new to jbo and I posted in the wrong place.