Im going to try to keep this up with updates about my car. as of now im jobless so it may be a little slow for some time
Here is the Flower when i got it.
That stock engine bay, after some cleaning when i got home.
And the inside
So the first thing i looked into was a wing delete, havent done it yet but it will be soon enough
.
With the wing delete where i live i need a third brake light. so i bought a rear shelf that had the raise for the brake light from a local pull a part. but then i saw one in a 4-door that didn't have the baby anchors in the back. so i got it to and found out that its to big..... so i ripped the carpet off both and put the flat carpet on the 2nd shelf board i got.
Also i have a strut bar and a cold air intake (AEM) pictures will be up soon
And for my birthday that's coming up i got my front bumper fixed
http://www.cardomain.com/gallery/15976212#
So i decided to paint match my valve cover and it looks good
http://www.cardomain.com/gallery/15976208#
And that's all i got right now. and to think all of that done by me (except the bumper) before i even turn 16
but what to do next??? looking at getting come Camaro seats very soon. Then go from there.
let melet me try this again
Here is the Flower when i got it.
That stock engine bay, after some cleaning when i got home.
And the inside
So the first thing i looked into was a wing delete, havent done it yet but it will be soon enough .
With the wing delete where i live i need a third brake light. so i bought a rear shelf that had the raise for the brake light from a local pull a part. but then i saw one in a 4-door that didn't have the baby anchors in the back. so i got it to and found out that its to big..... so i ripped the carpet off both and put the flat carpet on the 2nd shelf board i got.
Also i have a strut bar and a cold air intake (AEM) pictures will be up soon
And for my birthday that's coming up i got my front bumper fixed
So i decided to paint match my valve cover and it looks good
And that's all i got right now. and to think all of that done by me (except the bumper) before i even turn 16 but what to do next??? looking at getting come Camaro seats very soon. Then go from there.
I really like the direction you're heading in. Simple and clean. Props on getting the front bumpe re-painted. It's always best to fix anything that needs fixing before moving on to any mods. My suggestions for what should be next would be some nice 17" wheels (Please please please get wheels that have an offset as close to +45 as possible. Nothing ruins a car more than wheels that stick out because they're the wrong offset.) and tires (225/45/17), a slight drop (i.e. KYB AGX shocks and struts & Eibach Pro Kit springs) and tinted windows. I see you mentioned color matching the door handles and mirrors in your registry, again great ideas. Keep it up
!
P.S. I love your Car Domain username... J-Brody!
lol thanks and yes i want a clean and nice car. the jbrody came from me and my brother both having j-bodies so im his jbrody
im looking into wheels and drop springs,
here is the style that id like, or somthing close. tinted windows has also been floteing around in my head
as fot the size id like to get 16"
I have a full set of AGX struts with Intrax 1.75" lowering springs that I am
Looking to sell. ...
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
hmmm tell me more???? how much and how many miles do you got on them?
Just an update, yesterday afternoon i wired the 3rd brake light in the rear shelf up.
Love the valve cover and front bumper!
thanks the valve cover was a pain due to orange peal.
hey guys, update:
Got the back corner glass tinted my myself
Also the side markers have been tinted until i get some nightshade, also the front turn signals until i do a gxp grill swap
pictures will be up soon.
Love the progress. Red Sunfires are the best but of course I'm biased
Thanks, il get some better pics up since a phone fails at taking pics
and yes i do like my red sunfire
Blue sunflowers are better!!!
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
Here is meh intake
better pic of the window tint
And showing the glossiness of the door handles
smoked my turn signals and side markers. lowering springs and struts coming in this week.
Added Intrax springs and KYB AGX struts thanks to Roofy
Hey that stance looks familiar!!!!! How is the car riding for ya???
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
ummm went to a local Walmart running 3 on the fronts and 4 on the backs, going to send the fronts to 2 and get a alignment and il get back with ya. so far so good. and get back with me on the other stuff you have i might be interested.
Yeah i usually went with 2 on front and 5 or so on rear unless i was racing. The only reason I changed setups was for more fine tuning for the track. The AGX's treated me well though.
I have a lightweight flywheel and an eco turbo manifold for sale in the classifieds.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
I think I can go without spending the rest of my money right now :p
Hey man I'm looking to throw an intake on my Sunfire. How much is yours and where did you get it? Thanks
