Ok...lets try this again!
Didnt get my 13sec pass last year, still wasnt disappointed at all by what the car did. smashed my old MPH record of 96 and what i was expecting. this year im 100% confident it will do it.
Ran 14.0 @ 101 on the following mods:
Tuned by Innovative Tuning
TTR Upper/lower engine mounts
Prothane Tranny mounts
2.4 Ecotec Intake manifold swap
AEM cold air intake
Vibrant Velocity stack
2002 fuel rail
36lb cobalt ss/sc greentop injectors
Comp Cams Stage 1
ZZP 78lb valve springs and retainers
Tsudo Header
Electric Cutout
B&M Short shifter
M&H DOT slicks
Weight reduction
Eibach Sportlines
KYB AGX adjustable struts
This years additions include the following
Balance shaft delete
2-step rev limiter w/ no lift shift
GM Hardened Oil Pump Gears
Team Green LSD
AMMFAB Longtube Race Header
3" Cutout to match ammfab header outlet
13" Diamond Racing wheels with 23x9 DOT slicks.
Punisher lol
Waiting for:
AMMFAB header
6 puck unsprung clutch from clutch net (they sent the the wrong one!)
Car is sitting at our shop, motors out and complete, trans has been fitted with LSD. Should be running soon
C&C welcome!!!
14.04 @ 101 ALLMOTOR
very nice updates indeed! in for 13's.
Nice, damn can't believe those wheels, As big as my brakes LOLZ. Can't wait to see some lower times.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
a sub 14 second run all motor...that is just BA...i hope you get it this year.
Nice times ! I remember the first nitrous Eco on here only ran a 14.0 with a 75 shot. Granted it was auto , but still
good luck man, sure you will hit your goal
you got this man.
whats the deal with the aamfab header?? not many updates lately with it..
Very nice! I'm excited to see this up and running, and await some numbers!! Love na builds!
Thanks for all the feedback guys!
Mike pm'd me yesterday and it shouldn't be long now. Hes gona ship mine and newts together. Just waiting for newts to be ceramic coated now
14.04 @ 101 ALLMOTOR
nice updates!!
good luck on your quest for the 13's!
you'll get there man. you shoulda been there last year with that MPH!!!! hahaha
shoulda waited for a tail wind!
everything looks great man, im routin for ya!
I would love to put a 2 step and no lift in the beater just for @!#$s and giggles lol
Good luck man you should have this!
Want hub spacers? Shoot me a PM.
You know I approve
Any updates from Oleg on the clutches?
None as of yet. If I dont hear from him by thursday/friday ill be on the horn.
14.04 @ 101 ALLMOTOR
Whats the offset on the 13s?
13S are right around the corner!
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
I dont really remember to be honest...but they will stick out enough LOL. Hoping to get those on the car this weekend, bit of caliper grinding, nothing serious. Also hoping to get some other stuff installed like the WOT box
Gotta do something while i wait for parts
Will post pics as i go, Sry for the lack of recent pics, everythings kind of at a standstill at the moment...
14.04 @ 101 ALLMOTOR
hey do you know how much the wheel/tire combo weighs by chance
RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
have yet to weigh yet actually...will weigh em this weekend
hoping to get back at the car this weekend, even if parts dont arrive lol
14.04 @ 101 ALLMOTOR
UPDATE!
Got some work done on the car today...
Ground the calipers to clear the 13's
They are small, but wheel gap is a little excessive with there not being a motor or trans in it yet lol
Front half of carpeting back in as well as door panels
As it sits till tommorow...I hope the right clutch shows up...
14.04 @ 101 ALLMOTOR
Good stuff! How about some stiffer suspension to handle weight transfer for harder launches? Some Ground Controls wouwdo the job and shed a few lbs at the same time.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
very good stuff man... cant wait to see her run... you all motor guys are inspring the hell out of me thats for sure...
