well we love the evel eye look but it only really looks good on 95-02 sunfires. but being me and jess dont like how the stock sunfire bumpers look so i went a little out side the box for our sunfire front end swap were we are going to do on jess's car (pinkcavalierchick00)

i took a 95-99 sunfire bumper and im going to mold on a 03-05 cavalier lower bumper to it

the hood going to get some scoops and evel eyes

heres a cell phone pic of the bumper ill get better ones as i get more work done

first thinkg that came to mind was 3000gt lol

Gonna look badass, we finally gonna paint this thing when ur done? I got a bay open when ur ready.



Proud member of JBOK

I wasnt really going for this idea at first. but when jefff put the 2 pieces together and told me that no one has done the sunfire top with 03-05 cavi bottom the look of the bumper came out better then what i thought it would. I cant wait to get this done and all panted and put on the car. its gonna look badass..

it has potential.

kinda reminds me of a TMNT for some reason tho


I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"

In Loving Memory of Phil Martin December 14 2005

I SATCHMOE YOU!!!! wrote:it has potential.

kinda reminds me of a TMNT for some reason tho

totally

yuck

Should use an LSS bumper now that Im thinking of it.


I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"

In Loving Memory of Phil Martin December 14 2005

yeah... the base bumper is not attractive at all...

The plan is rl lip for now till we can get our hands on a gm tuner

i hope you are moulding it with lord fusor and not fibreglass

Panel bond and welding it with abs plastic welder and smoothing it with urathane glade pudy

cavalierboy02 wrote:Panel bond and welding it with abs plastic welder and smoothing it with urathane glade pudy

Personally I would just grab a tube of Speedgrip epoxy, you can use it to bond, plus it's sandable so you can spread it over the seam like putty and sand it out...save you a lot of money in supplies, one $40 tube should do it all.

Not too bad man, just looks like of plain. LSS bumper would look way better imo, but this shouldn't look too bad. Keep it up.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:Not too bad man, just looks like of plain. LSS bumper would look way better imo, but this shouldn't look too bad. Keep it up.

Flickr Photostream Facebook Twitter

98z24ragtop wrote:

WHITECAVY wrote:Not too bad man, just looks like of plain. LSS bumper would look way better imo, but this shouldn't look too bad. Keep it up.

When i first looked at it, it looked interesting.... but think the LSS would be better... any reason why you chose a base bumber?

Considering the amount of work to create a custom front.... I would have personally gone the extra mile with an LSS bumper, by far a better looking bumper... but the RK lip will improve it when you get there... deff interested to see how it turns out.

silver03cavii wrote:
When i first looked at it, it looked interesting.... but think the LSS would be better... any reason why you chose a base bumber?

it's the only one he had available.

Interested in how this turns out. Could look good but the only real way is to mock it up and put it on the car. Thinking it being on the car could make it or break it.


Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.

Cavie Freak aka E-Thug wrote:Interested in how this turns out. Could look good but the only real way is to mock it up and put it on the car. Thinking it being on the car could make it or break it.

this .. ! but again i love all these one offs lately... i have one more one off i want to do .

Chuckles2002 wrote:

silver03cavii wrote:
When i first looked at it, it looked interesting.... but think the LSS would be better... any reason why you chose a base bumber?

it's the only one he had available.

he had a few others but ive always been a fan of the 03-05 front cavalier bumper or whole front end i would say! we are gonna get a RK lip for the bottom of the bumper. after im finish fixing it up.

I was bored and did a @!#$ty photoshop... could look good if done right







Edited 1 time(s). Last edited Tuesday, July 13, 2010 9:27 PM

haha does look like a turtle..

Edited 1 time(s). Last edited Wednesday, July 14, 2010 5:41 AM

Disclaimer: Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.