Not exactly in its former glory but tommarow when I get some plates and put the filter on the intake it'll be back on the road.



Theres still work to do, fitment on everythign of the front end sucks, the hood, fenders, front bumper, and doors all need to be aligned, they were all just kinda tossed on to get the car in one piece ASAP








Obviously the rear bumper needs paint but on the bright side thats gotta be one of the nicest fittings exhaust on a J ever hahaha



The reason I got the bumper is the car it was on got a 120 mph gaurd rail, in the pics you could see the cat from inside the car where the floor was missing and ripped apart, the rear bumper was one of the few pieces to make it with pretay minor damage, alot of scratches on the right side but no deep gauges or anything.

Still looks good either way. not really digging the 3 tone but it works. im sure its nice and quiet now too eh?

coming together nicely. put the grill on the GTC cuz its uber gay.

and i only use the word uber when im really serious.





BeardLife / Club Awesome Reject Blog

not at all, I forgot my 02 sensor socket at work and the 02 sesnor is still in the 02 housing on the turbo, so with the front 02 missings its loud as hell LOL, I'll take care of that in the AM

LOL the grill came with the bumper

you should drive it out when you get plates on it to get all these cases of mt dew. cuz isnt the DMV closed tomorrow?

i would say try to save the hood from the parells of daily driving. at least get a stocker for it and wrap the beauty up in plastic.

z yaaaa wrote:i would say try to save the hood from the parells of daily driving. at least get a stocker for it and wrap the beauty up in plastic.

Ya I agree with this man I have a nice stock red one I could trade you straight up for.

Chewy likes Cake wrote:

z yaaaa wrote:i would say try to save the hood from the parells of daily driving. at least get a stocker for it and wrap the beauty up in plastic.

Ya I agree with this man I have a nice stock red one I could trade you straight up for.

the hoods for sale, everyone wants it noone has money hahah. Its staying on the car till its gone

That's hot looking!

See you sourced another trunk to get it completely stock .

I understand though, Jame's car has seen better days, as the parts on it can say the same. The rear on my car came off of his actually, and needed some nice repair where it had been backed into while on his car.

god i wish i could afford that hood.

Glad to see you got it all ready so you can actually drive it now.

Hood still looks great on there. I would keep it, but that's just me.





Edited 1 time(s). Last edited Sunday, August 12, 2007 7:31 PM


KRI Motorsports BBQ/Car Meet ~ Sunday August 26th, 2007 CLICK HERE for info!

lookin good for a dd hood looks good might as well keep it on til ya sell it if ya do



http://www.cardomain.com/ride/2084827

you're so @!#$in gay

good to see it back on the road.

DroptopPaul wrote:you're so @!#$in gay

x1000000

I like that front end! thats not so @!#$in gay!

Passenger wheel liner is hanging, just went and got the @!#$ to reattach it, just got my temp plate, picked up my 02 sensor socket form work which I'm about to change and I have an intake laying in the garage waiting... it will legally be driven on the road in one piece (minus interior) for the first time in like almost 2 years hahahah

I'm excited for power windows and sunroof LOL

Looks allright. I'm a bit lost, i know what this car looked like before but what happend to it?

I love that hood! What is it? Invader?
And that front Grille... same as this one?
http://cgi.ebay.ca/03-05-04-Chevy-Cavalier-Bumper-Billet-Grille-Grill-S_W0QQitemZ230160106258QQihZ013QQcategoryZ33645QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Please let me know! I was considering getting the one off ebay, but idk how it would look on my silver



Buddy Club Ecotec Cavalier
* More to come *

car starts and runs, let it idle for liek half an hour

hood is one of kind

grill no idea, it came with the bumper

Still makes me sad to think what it once was




Eh...old man with a Corvette now...it was bound to happen sooner rather than later right?

boooooooooo darkstars...ruined..

Paul Yannacopoulos wrote:Looks allright. I'm a bit lost, i know what this car looked like before but what happend to it?

some pics....




























mods before it went back to near stock-

-Hahn Racecraft Ecotec Stage 2 Turbo Kit
-Jethot 2000 coated turbo manifold
-Super 16G internally gated turbocharger
-Jet Hot 2000 coated turbo manifold (black)
-Front mount Intercooler
-2.5" mandrel bent charge pipes
-Lo-Ko Performance coated charge pipes (Mettalic Silver)
-K&N cone air filter
-Camaro threaded IAT sensor
-Evolution Motorsports polished billet BOV
-Ported Intake manifold
-Port matched head
-RSM 62 MM Throttle body
-Accel 320 cc injectors
-LS1 injector plugs wired into injector harness
-255LPH high pressure in tank pump
-RKSport Spark springs
-Champion 407 spark plugs
-HPTuners tuning software
-Nitrous Express Import EFI wet kit 50 shot
-2.25 inch mandrel bent down pipe
-QTP 2.25" exhaust cutout welded to down pipe
-QTP electronic valve for cutout
-High flow cat
-2.25 "Custom cat back exhaust
-AEM billet clutch fluid reservoir bracket
-RKSport carbon fiber coolant bottle cover
-RKSport carbon fiber under hood fuse box cover
-RKSport carbon fiber engine cover
-Polished valve cover
-Polished fuel rail
-Prothane upper transmission mount
-Prothane lower transmission mount
-Turbo Tech Racing upper motor mount
-RKSport lower motor mount
-Prothane control arm bushings
-MRZ Billet strut tower caps with machined Darkstars logo
-Vibrant front strut tower brace
-Eibach 25.4 MM front sway bar
-Eibach polyurethane front sway bar bushings
-Vibrant rear strut tower brace
-Eibach 22 MM rear sway bar
-Eibach polyurethane rear sway bar bushings
-Bear Decela drilled & sloted rotors
-Hawk HPS Ferro Carbon brake pads
-B&M short throw shifter
-Exel DL-46 Hyper Black 18's with a chrome lip
-Kuhmo Ecstra Supra 712 225/45/18 tires
-Flat black high temperature painted brakes all around
-Black Tenzo R Rally seats
-Tenzo R seat sliders
-Sparco seat brackets
-A-pillar dual gauge pod
-Autometer Z-series voltmeter
-Autometer Z-series A/F gauge
-(2) Blue neon tubes under the dash
-removed rear bow tie emblem
-removed rear Cavalier LS emblem
-removed dealer sticker
-removed side moldings
-Sylvania Silverstar headlights
-Nokya Artic white fog light bulbs
-DRL mod (turns off daytime running lights)
-GM Xtreme tuner front end
-Custom molded & painted VIS Carbon Fiber Invader hood with eyelids
-Toyota Cavalier fenders
-custom meshed front
-Stainless steel muffler tip
-Fully shaved trunk lid, no lock, no lights, no spoiler
-00-02 stock outer tail lights
-Carbon Fiber front emblem
-Alpine IVA-D300 in dash touch screen
-Alpine RUE- 4187 remote control
-Alpine SPR-17LS Type R 6.5 inch components
-Alpine V12 MRD-M1000
-Alpine V12 MRD-M500
-Alpine V12 MRV-F340
-Alpine Type R 12's (3)
-Sony Play Station 2
-Custom PS2 install lit up with LED's in glove box
-Dynamat top to bottom through the whole car
-Toyota Cavalier trunk liner
-Rear seat delete
-False floor for trunk

OMG That's freakin HOT!
I love that car! That's what I want my car to be like someday! lol
What is that round thing on the inner of the door panel though?



Buddy Club Ecotec Cavalier
* More to come *

BlueDeuce (dnt02cavls) wrote:Still makes me sad to think what it once was

STYLEZ wrote:boooooooooo darkstars...ruined..

you got to admit though, it was sweet while it lasted, just got burnt out on the show scene, time to move on to a new project so this car is gonna be the daily driver and I'm stock piling parts to make a MONSTER of a racecar

did the show thing, its time for the race thing