Intalled the TTR 2.4 Upper mount today (thanks WrenchMonkey/Tom for being my hands, and ZSpeedCavi/Curt for keeping us company )

Tools Needed:

1 x 3/8" drive Wratchet
2 x 3/8" drive 6" Extension
1 x 3/8" drive Deep 15mm socket
1 x 3/8" drive 10mm socket
1 x Pair of Pliers

Time to install: 15mins

Difficalty of install: 1 on a scale of 10 (1 easy, 10 hard)

Here are some pics from the install.....

Placing jack under the lower mount, half a pump to hold the engine in place.....

Pulling the coolant bottle bolt...... used a pair of pliers to pull the small coolant line......

Moved coolant bottle to get at one of the 3 15mm nuts......


Pulling the 2 15mm bolts from the engine mount bracket......

Stock mount vs my TTR mount........

Mount set in place and the 2 15mm bolts started.......

Lowered the mount down onto the 2 studs, and then tightened up the 15mm bolts.......

Tightened up the 2 nuts and 2 bolts........

Reinstalled coolant bottle and admired sexy new mount.....



My Review:

Alot stiffer/stronger then the stock mount with insert. Even under load, the engine DOES NOT MOVE! In my case I did notice more vibs then with the stock/insert combo, BUT I do also have an Old School RK lower mount, and the Prothane trans mounts (also no balance shafts ).

I give this product a 5 out of 5 in both aperance and function.

Thank you Aaron for providing us with a REAL Engine mount!!!




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

looks nice





View my MySpace

i lke it, your engine bay is sooo sweet. wish i was able to put a HO mani in mine




FOR SALE: (5) '95-'99 Z24 Rims

sweet install and review





RIP JESSE GERARD.....Youll always be in my thoughts and prayers...

WTF man, how are ya'll gettin these mounts already lol? I paid early as hell as well..











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

hey I gotta be there for something. besides i was in the sleep zone



Team GREEN

Quote:

WTF man, how are ya'll gettin these mounts already lol? I paid early as hell as well..

I know right, what's up wit dat?

Dang,
Thinking I should have gone black and red.
Oh well,

Good stuff guys.

-M


Remember....syringes go in the RED waste basket.

i still have no clue where to get this mount! could someone let me know please?


"Boost tuning"....... have you had your 8 PSI today?

future name of the winter shop!!!

seasons z24 wrote:i still have no clue where to get this mount! could someone let me know please?

www.TurboTechRacing.com Order on the site


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

its about time they made a better mount for you guys. it looks great!

i still dont see why theres that tab for the "Ac line" i have yet to see an install with somebody acctually using it.

can anybody clarify?




White 98'Z-alive n kickn
Black 97'Z-down for the count

Clean your engine bay old man!

i said why in my post why i didnt use it yet , but just to re-cap

since ive got the super charger , the a/c line runs right under the bracket for the nose support for the s/c , and the hose rubs the bracket , on the stock mount it held the hose up to high and it rubbed , even with me tweaking the hose

ive got to get a clamp similar to the 1 in this auction to hold the hose - http://cgi.ebay.com/ebaymotors/Summit-G1888-Hose-Mounting-Clamps-1-500in-Diameter-Hole_W0QQcmdZViewItemQQcategoryZ42604QQihZ011QQitemZ320039220297QQrdZ1

If you dont have the GM supercharger which most dont; the A/C bracket is there to keep the OEM look.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

looks great, good to see a good product be released. engine mounts r one of my fav cheap mods to do to a car and i dont mind any vibes hahaha.

my factory a/c clip was broken....... so once I get a clip for it, I will put the tab to use (might put a zip tie to use for now)

Jay wrote:Clean your engine bay old man!

love you too Jay




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

is this clip a plastic one? i believe i may have left that off my car when i put the new engine in...

looks like i'll be heading to gm to get a new one since i have no idea where the old one is...
can somebody take a pic of what its spose to look like stock?

thanks




White 98'Z-alive n kickn
Black 97'Z-down for the count

its in my pics...... Tom broke it pulling it out (you can see the broken parts laying on top of the mount)




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Z YAAAA wrote:i still dont see why theres that tab for the "Ac line" i have yet to see an install with somebody acctually using it.

can anybody clarify?

Mine is an eco but its the same exact thing just a little taller, me and phil mocked up the model for aaron to use and he left the ac line holder on there.



Stock



sorry for not rotating them, tilt your head lol.

Brian... thats fugly as hell.

Looks great man



STUFF FOR SALE... Please click here and see more info...

lol.......... thanks Jason........ I think.........




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Hmmm the 2.4 ac lines dont have that metal connector for the top hole of the mount.. Oh well, I wont be using it anyway. No big deal.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

hey brian. ill take ur old mount off your hands for ya. i could use one.


i'm baaaaack!!

.kURt. wrote:hey brian. ill take ur old mount off your hands for ya. i could use one.

someone beat u to it already but as soon as i pick my upper mount up u can have dibs..... it has the insert



Team GREEN

Z Speed Cavi wrote:

.kURt. wrote:hey brian. ill take ur old mount off your hands for ya. i could use one.

someone beat u to it already but as soon as i pick my upper mount up u can have dibs..... it has the insert

sweet!


i'm baaaaack!!