Well since my engine bay will be going through some changes with my whole msd setup, plugs wires and coils I thought i'd snap off 2 pics tonight after we did a major overhaul in the bay..
any questions.. post em
thanks
LE61T PTE6262 Powered 
noice!! what kinda fuel management set up are you running?
just the fmu, custom rail from nachotec and the aeromotive fpr... nothing to special right now
LE61T PTE6262 Powered
is your setup completly custom? im looking to boost my ecotec now that im done with it being a show car. hadnt decided on a turbo setup or the GM s/c, but i dont know what to go with on turbo setup, especially since the fuel setup on the 02's is different than the 03's and im pretty sure most of the turbo kits out are for the 03+s.
^^^^im pretty shure any 03+ turbo kit will work on an 02 eco.....they just list it as 03+ because people might get confused since there were two 2.2L engines in 02'
Look at that craftmenship
here is a pic of my trouble maker LOL HBC in car boost controller it's 170 bucks well spent..
yeah adam it's comkpletely custom, Hahn sends things to custom fit your 02 rail for the 03 setup if you go with hahn
LE61T PTE6262 Powered
who is the we that is overhauling it??? rodimus?
good luck, i want a ride when your finished
yea like ive never seen that before
where do you find an MBC like that?
Nice looking engine bay, can't wait for the updated pics
that looks super nice man, cant wait for the new look...
-------------
Now Blazing: Black Domina
looks nice as hell sorry kind of off topic did u ever beat that guy up
shhhhh its me wrote:looks nice as hell sorry kind of off topic did u ever beat that guy up
no.. he gave me directions to meet him at an effing police station
LE61T PTE6262 Powered
sexy!...
why is the crankase breather thingy not hooked up? just cuirous....
did i mention sexy!
when you close the hood it hits the hood, i would really like to get a catch can...
LE61T PTE6262 Powered
I think the wires should be a little more organized lol.. Geez, looks like a maze of wires in there hehe
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
trust me it's worse you didnt see it with the msd harness LOL...
we are makign it look better slowy... once we get my whole msd setup in there it will be better...
it used to be a freakign rats nest wires everywhere.. I think we cut about 20 feet fo tangled wire last night... damned udner body neons...
LE61T PTE6262 Powered
QBE (73H 800573D 0N3) wrote:trust me it's worse you didnt see it with the msd harness LOL...
we are makign it look better slowy... once we get my whole msd setup in there it will be better...
it used to be a freakign rats nest wires everywhere.. I think we cut about 20 feet fo tangled wire last night... damned udner body neons...
All good man, just givin ya a hard time. At least your workin on it.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
it's fine its gonna be msd plug wires, msd coils, msd coil packs and once that is done we will wire loom all the open wires and clean it up and then wash the engine. I am also getting a valve cover powder coated black
LE61T PTE6262 Powered
Wow... that looks like a mess
__________________________________________________________________
Performance cars do not win car shows and show cars do not win races.
It's up to you to decide which you'd rather win.
lets race
Ian it's so good tos ee you goign back tos tock for some speed and handling! good man
LE61T PTE6262 Powered
Ian Lacey wrote:Wow... that looks like a mess
R.I.P. Brian Klocke, you will never be forgotten
