carbon fiber how to??????? - Interior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
carbon fiber how to???????
Sunday, January 25, 2009 10:44 AM
i have searched and searched and came up with nothing. i believe there was 41 pages of stuff dealing with carbon fiber and not one had a how to, that i saw. if there was, i over looked it. sorry. i was just wondering if there is a write up on this? i know who the persons are on the org who work with the stuff. i just want to know if there is a write up? i saw the one pic. of the guy who wrapped the sun roof slider in fiber and that was NICE. i might try and do that later on. right now i just want to wrap a few small things. i am familiar with fiberglass work.



Re: carbon fiber how to???????
Sunday, January 25, 2009 3:00 PM
Check out fiberglassforums.com There are a ton of how to's on fiberglass and carbon fiber.



http://nwgme.org
Re: carbon fiber how to???????
Sunday, January 25, 2009 3:18 PM
preciate that. i didnt realize there was a forum for that.


Re: carbon fiber how to???????
Sunday, January 25, 2009 5:21 PM
Freeman Supply Those are the actual videos that my instuctor uses in my fiberglass/composites class.



Re: carbon fiber how to???????
Tuesday, January 27, 2009 4:30 PM
carbon fiber video

check that out. i found it very useful



Re: carbon fiber how to???????
Wednesday, February 04, 2009 8:09 PM
lol they did a whole civic at he end
Re: carbon fiber how to???????
Thursday, February 05, 2009 5:16 AM
youtube?






Re: carbon fiber how to???????
Thursday, February 05, 2009 7:31 AM
There are lots of methods that get the same finished product to some degree. Look around the interwebs and watch all the videos and read all the articles you can. Go buy some materials and start trying different methods until you figure out what works best for you and gives the best final product. Honestly it really is not that hard, there are a few tricks that you will learn along the way to make the process less time consuming, as with anything it just takes some practice and a truck load of patience.


KevinP (Stabby McShankyou) wrote:
and I'm NOT a pedo. everyone knows i've got a wheelchair fetish.


Re: carbon fiber how to???????
Thursday, February 05, 2009 11:42 AM
Harrington Esquire wrote:There are lots of methods that get the same finished product to some degree. Look around the interwebs and watch all the videos and read all the articles you can. Go buy some materials and start trying different methods until you figure out what works best for you and gives the best final product. Honestly it really is not that hard, there are a few tricks that you will learn along the way to make the process less time consuming, as with anything it just takes some practice and a truck load of patience.





patience is one thing almost everyone needs to learn to make a good car.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography
Re: carbon fiber how to???????
Monday, February 23, 2009 9:55 PM
Harrington are you using a vaccum bag setup for your carbon fiber or what

RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: carbon fiber how to???????
Tuesday, February 24, 2009 1:57 PM
Yes I am.


KevinP (Stabby McShankyou) wrote:
and I'm NOT a pedo. everyone knows i've got a wheelchair fetish.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search