would a set of sunfire or cavy seats fit in my 91 sunbird?
fronts should. not really sure about the back seats. i thing the 3rd gen back seats are a little bit bigger then athe 2nd gens
![](http://registry.gmenthusiast.com/images/spaceman/thumbnail_personal_pic.jpg)
![](http://www.r6messagenet.com/forums/images/smilies/bunnycake.gif)
simple minds talk about other people.
average minds talk about events.
great minds discuss ideas
alright, will that just bolt in, can i use the sunfires or cavys tracks, because i busted mine
i believe ALL J seats are the same size for their applications. meaning all buckets are interchangeable and all coupe/sedan rears are interchangeable and all vert rears (since they are smaller than c/s) are interchangeable with all other verts.
![](http://widget.slide.com/rdr/1/1/4/S/d0000000ef22972/1/79/v5ukH3MM7j9eacRH5PV8UMUq82r5L10w.jpg)
coming back in 2008...
sweet good to know, ive never actaully taken my seats out, is it hard to remove the front ones, does it take a alot of time?
no it's not hard at all, just 4 bolts and out they come
yeah....should take about 10 minutes if youre slow. i know mine had a wire underneath that had to be unplugged from the connector (air bag related i believe)
![](http://widget.slide.com/rdr/1/1/4/S/d0000000ef22972/1/79/v5ukH3MM7j9eacRH5PV8UMUq82r5L10w.jpg)
coming back in 2008...
(tabs) wrote:i know mine had a wire underneath that had to be unplugged from the connector (air bag related i believe)
Seatbelt idiot light and chime wire. But yeah, 4 bolts per seat and out they come. might have to take the newer seats off the brackets and put them on your brackets though. Again, 4 bolts for that, and that will take a bit longer, those bolts are long and really fine threaded.