well i have a couple of questions on converting 2 stock power windows. i have the spal kit installed on my car but i'm going for a stock look so here are my questions.

1) what parts do i need do i just need the motor and the regulator or is there more? (part numbers would be good)

2)how hard is it 2 do this? Can i do it on my own or do i leave it 2 the experts?

3)what tools do i need if i could do it on my own?

if any1 has done this please give me some info and some heads up. thanks in advance.


------------------------------------------------------------------------

http://www.cardomain.com/ride/789103

U need the motor and regulators..and the console switch and thats it.. i dot all my stuff for about 150 or so cdn....phil

i already have the oem power window switches. i found this on ebay

Power Window Regulator+Motor (Left)

Power Window Regulator+Motor (Right)

would this be all that i need?


------------------------------------------------------------------------

http://www.cardomain.com/ride/789103

YOU CAN JUST GET AFTERMARKET ONE FOR LIKE 60 OFF EBAY

TurboEcotec5spdSwap wrote:YOU CAN JUST GET AFTERMARKET ONE FOR LIKE 60 OFF EBAY

like oem aftermarket or diff. aftermarket 1s. can you show me some please?


------------------------------------------------------------------------

http://www.cardomain.com/ride/789103

your dumb



JBO'S Mr. 64.....