Hey. Anyone have an AM e-brake handle? Was it easy to install onto the e-brake (other than taking it off... I know that's a pain). Pics? Thanks!


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

I am listening as well.... got a new handle on the way and am interested as to how to install






And now you are reading my signature...great
My 2004 Sunburst Orange Sedan - http://www.j-body.org/forums/read.php?f=47&i=54063&t=54063
input is highly appreciated!

One way to take it off... cut it. Dremel/Air Cut Off tool. The only thing I am not sure about is the shape of the bar under the stock handle. Most of these aftermarket handles are round. There will probably be some set screws with an allen wrench to hold on the new handle.



FOR SALE

I figured that it was shaped funny. My main concern is the lock button. Hoping I won't mess it up with an AM handle.


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

Looking at my interior I may tackle this as well. This stock handle sticks out like a sore thumb. The question is who will get to this project first?



FOR SALE

Someone has beat you guys to it....

E. B. wrote:Someone has beat you guys to it....

wasn't trying to be a first. Matter of fact, was actually looking for somebody who had actually done it already.


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

Oh my bad. Didn't see the previous post


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

ahahha, yea it was reply to Bagged's post .. it looks like it could be done.. I Would love to do it too... Just don't know how to start it..

i would love to do it too if some one could figure it out should post a write up




CarDomain: http://www.cardomain.com/ride/3828276

Sorry if it came out that way, I know it can be done i've seen it done that looks like Big Poppa's car from back in the day. I could be wrong, I meant first to get to it on this post. I have too many projects going on at the moment however tomorrow when I re-assemble the interior I may go ahead and take it off that way when the new one comes in I can install it.



FOR SALE

Alright guys. I'm doin it! I'm ordering my ebrake handle tonight. I will be bustin out the dremmel when it gets here. I will post it as a how to on this thread of no one beats me to it.


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

Ok. Here is the Handle I ordered...

http://shop.vendio.com/crowderscustomizing/item/997729236/?s=1271404562

Should go nicely with my chrome auto shift handle.


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

And from the pics, it looks like it will fit almost perfect on the shaft. And also looks like the boot will fit right on it where the ring goes.


—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-

have you installed it yet, any pics on the progress?

I got my old one off, and have it chopped into. I need to do a little more trimming and i'll have mine installed. I'll take a few pictures when I get it done.



FOR SALE

Hmmmm...cutting the e-brake handle???? I've taken two of them out with a hair dryer and some elbow grease...one out of a 97 and one out of a 00....no cutting involved. Maybe this will save some aggrivation...

so how excatly are you guys installing the handle? is there an adapter that goes on first or is it just set screws like the aftermarket shift knobs?