Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23 - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 13, 2008 8:59 PM
I had never had any experience with clutchmasters prior. The clutch arrived one week after the order was placed (It was shipped out the next business day).

When I received it the bolts that hold the pressure plate to the flywheel barely fit through the holes. In fact I actually had to thread them by hand through the holes. I was not OK with this so I called clutchmasters and the tech was very helpful. It turns out they paint the pressure plate white and the paint was thick enough on the inside off the holes to cause a problem with the bolt. I just used a peice of sandpaper and removed the paint from the inside of the holes and the bolts slipped through like they were supposed to. Below is a picture of the painted pressure plate.


The clutch I am using is the FX300. The price was 550 for the clutch kit. It is not an OE replacement. It is a performance clutch. I am not sure based on specifications what exactly what it would be comparable to in the spec line.

The break in period was all easy stop and go for atleast the first thousand miles and gradually got more agressive as I got closer to 3,000 miles I needed for the engine break in period.

My pedal feel is lighter than stock but not so light it has a unconnected or vauge feel. Just enough you would prefer it over stock in traffic. The clutch release has the exact same feel and in the same position every time so it is very predictable. Engagement is not all or nothing. The only time I feel it get a litle grabby is when moving the car by feathering the clutch witout giving it any gas or engaging the clutch too quick with very little gas. In fact if you were not used to a stock clutch you most likely would not notice it was a performance clutch. So far I only have 3000 miles on it and have not had an issue.

I really like the way it engages. I would highly reccomend this clutch and would buy one again in a heartbeat. By the way I have nothing to gain from this nor does clutchmasters even know of this reveiw. I just want to share my thoughts with others who search in the future. Questions and comments are welcome.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!


Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 13, 2008 9:03 PM
Good to know ! :0.



My Cav
I give up...
i'm buying a VW those people love trees, so they should love eachother too... "Andy"
Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, February 14, 2008 11:44 AM
Did it come with a new slave cylinder too?



Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, February 14, 2008 11:51 AM
yep



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, February 14, 2008 4:09 PM
Only problems I've ever heard about Clutchmasters was their Dual Mass setups, from a few years ago..... I remember quite a few posts about pre-mature failure (ie: slippage).

Good review Wade.




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, February 14, 2008 8:21 PM
is it a on off switch like the spec ? or more like stock ?






Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Friday, February 15, 2008 7:50 AM
Definatly not an on off switch. The pedal travel between disengaged and fully engaged is the same as stock. It is a litle more grabby than the stock but only someone who has driven with a stock clutch recently would notice. It encourages you you give it a litle more gas and get of the clutch a litle more quickly. If you do it will launch as smoothly as an automatic and the engagement will be as smooth as stock.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Monday, February 18, 2008 11:46 AM
Excellent.


I seem to recall that the throw-out bearing was seperate? Can you confirm?


--------------------------------------------------------
2002 Sunfire -->
- Ractive steering wheel
- ASA 17" EM9 + Nexen N5000 215/45/17 (steelies for winter)
- D-Spec Lowering kit @ 1.4" (issues currently )
- Rockford P250.1 + MTX MZS1004 + Panasonic CQ-C8313U head unit
- Barely legal tint.
Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Monday, February 18, 2008 12:47 PM
The throw out bearing was identical to the stock setup.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 27, 2008 11:31 AM
Any updates on this? How is it working out Wade?



2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 27, 2008 4:11 PM
If anyone wants a clutch masters kit PM us we are a dealer for them


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 27, 2008 8:38 PM
Luke Heier wrote:Any updates on this? How is it working out Wade?

The only driving of it I have done lately has been to pull it in and out of my garage so I really do not have an update for you.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, February 27, 2008 8:41 PM
Turbo Tech Racing wrote:If anyone wants a clutch masters kit PM us we are a dealer for them


No kidding ehh. How long have you been a dealer? I remember glancing at your website and not seeing it offered when I bought mine last spring/summer.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, February 28, 2008 2:15 PM
^^^ We just have not got around to adding all the kits yet....

We have been a dealer for about 2 years now for them. Most sales come from customers contacting us and asking for them.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Monday, March 10, 2008 2:08 PM
Wade where did you get the clutch from? im about to order one and i cant find one for 550.
later,james



Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Monday, March 10, 2008 8:31 PM
We have them PM us for the best price.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Tuesday, March 11, 2008 6:43 PM
Aaron i did pm you on yahoo and you gave me a price...

thanks,james



Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Tuesday, March 11, 2008 7:05 PM
I bought mine from a seller brand on ebay. That was about what I paid for mine plus shipping.



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, March 12, 2008 6:27 AM
well, if it fits on the LD9 Getrag, it should fit on the Eco Getrag.

I think I might have to get rid of my SPEC clutch and try this one.



Desert Tuners

“When you come across a big kettle of crazy, it’s best not to stir it.”


Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, March 12, 2008 1:45 PM
im trying the FX400 with my ECOTEC im going to be ordering one buy friday

later,james



Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Wednesday, March 12, 2008 5:28 PM
Wade did y buy it from street gear online? im just checking before i buy something on ebay and he had them around that price

thanks,james




Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Thursday, March 13, 2008 7:22 PM
james wrote:im trying the FX400 with my ECOTEC im going to be ordering one buy friday

later,james


I am not sure who I bought it from as I called the number listed in the auction instead of buying it through ebay. I will dig through some stuff later and see if I can find out where I the ebay sellers name or something.

Be sure and let us know how you like the fx400!!



FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!

Re: Clutchmasters FX300 clutch kit for the 2.4 LD9 with gertrag F23
Friday, March 14, 2008 9:43 AM
okay cool can you let me know as soon as you find out

thanks,james



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search