Need help with a 2001 z24 auto prob - Transmission Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Need help with a 2001 z24 auto prob
Thursday, March 30, 2006 5:12 PM
ok here's the deal

2001 z24, 4sp auto, just cracked 100k, and has weak motor mounts



all of a sudden a strange grinding-ish noise started coming from the front end.

almost sounds like a bearing,.. perhalps an axle.

sound seems to happen on each revolution of the tire/drivetrain

so this is what we did.

took it for a troubleshoot test drive,... go about 30ish, pop in neutral and do a mini slalom.

turn right sound is on the drivers,... turn left sound is on the passenger,.. wierd.

So,.. we:

replaced both bearings (from a newer jbod from the wreckers)

sound still there

replaced both axles (right from the parts store)

sound still there

rotated the tires,.. just in case, cause I thought the sound is almost a rubbing-on-plastic sound

Can hear it under accelleration,.. but not soo bad, decel seemed a bit louder than accel. The loudest is in neutral doing the mild slalom

I'm freakin stumped.

I even did tight turns,.. well circles in each direction and not a freakin thing,.. no sounds at all.

the sound:

*mild/muffled sounding not harsh*
crunch/thump, grind,.... crunch/thump, grind,..... crunch/thump, grind,......

btw: ball joints are good too. And non related,.. the sway bar end links are new too from changing the axles.

Is this tranny related?
can this be steering rack related?
Is the engine sagging and rubbing on something I didn't see?

Need some expert advice on this,.. car is 200kms away and I've made 3 trips out there to try and fix the prob. I'm totally stumped.

Re: Need help with a 2001 z24 auto prob
Thursday, March 30, 2006 8:58 PM
first thing i would do is check your tranny fluid to see if its low, then get it changed first and put some of that LUCAS tranny stuff it works wonders, do the same thing to your sterring fluids, good luck
Re: Need help with a 2001 z24 auto prob
Saturday, April 08, 2006 7:18 PM
bump... anymore ideas? changed the cv axles and bearings still getting the thump noise from under the drivers side floor...

Could it be the bearings in the tranny?


http://www.cardomain.com/ride/857357
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search