okay, i have a 95 cavalier 3 spd auto and im swapping to a 5 speed isuzu..

i bought a tranny and everything from a private seller, and theres a bunch of parts in here, do any of you have a picture of what the tranny mount housings look like...the part that needs to be welded in..because he also sent urethene tranny mounts?

Thanks a bunch


SPONSORED BY: CAVALIER EXTREME

the part that needs to be welded to the frame are metal brackets........ prolly not included, unless this guy was also doing the trans swap, and never did it. The tranny mount 'housings' are black metal pieces, that have large ROUND holes in the one end, and spots for 3 bolts in the other. The urethane goes in the large holes, after you remove the stock black rubber pieces.




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

so where do u know to weld these housings at?


SPONSORED BY: CAVALIER EXTREME

This is what the castings look like that bolt to the transmissionThis is the Front Bracket that needs to be welded in on the frame
The rear bracket is avaliable through GM. The front one you can order from us or cut off any donor car.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

^^^^ There are 2 links on the first line one of the mounts and one of the bracket. Sorry i forgot to hit the enter key.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!

thanks thats a lot of help...so how do i know where to weld this?


SPONSORED BY: CAVALIER EXTREME

anyone know the part number for the rear bracket....that needs welding to the frame


<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_sunfire.gif">
<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_personal_pic.jpg">

so how many housings need to be welded?

and where do i know to weld them at?


SPONSORED BY: CAVALIER EXTREME